• Sputter targets and FMT crystals on page V3
• Two stage high vacuum mechanical pumps page K6
• Edwards rotary vane pumps on page K6
• 5m³/hr, 2 stage oil sealed rotary vane pump – Pfeiffer (German made) DUO 6 rotary pump
• Vacuum clamps, O-rings, centring rings, blanking plates, hose adapters
• Vacuum elbows, tees, crosses, straight tube connector, bellows, vacuum hose
• Vacuum values
• Vacuum grease
• Vacuum units conversion calculator

All items on this page are CE certified except for the US 110 volt version.

High pressure molecular pumps and diffusion pumps are available - ask.

DIAPHRAGM VACUUM PUMPS
Compact and efficient small Japanese made pumps, especially designed for clean-room use, in the manufacture of semiconductor devices, for evacuating medium sized vacuum desiccators or for suction on a filter flask. These pumps are useful for numerous other applications where an intermediate vacuum is required or when considerable water vapour is pumped.
Diaphragm pumps are a proficient and environmentally friendly alternative to water jet pumps. They do not consume water and, therefore, do not produce contaminated waste water.
Note: A larger diaphragm pump is available in the Emitech range (K pages). However, it should be noted that larger diaphragm pumps, when compared with rotary pumps (also called mechanical or fore-pumps) are a little noisier, require a little more maintenance, do not achieve as good an ultimate vacuum and are more expensive. The advantage of being totally oil-free remains and it is known that rotary pump oil can contaminate a system, streaming past the diffusion pump. Arguments for a diaphragm pump backing a turbo-molecular pump are weak, since that pump's action scarcely allows oil vapour into the pumped space.

Features

• Oil-free for clean-room use
• Spark-less electro magnetic drive
• Long term high reliability
• Designed to minimise noise generation
• Compact design with strong Nylon housing
• Inlet and outlet HEPA filters

Specifications

Model	VFV-30	VFV-60
Pumping Power	2.5 l/min (0.088 cfm)
Ultimate Pressure	-300 mmHg (-40 kPa)	-600 mmHg (-80 kPa)
Power Requirement	as required VAC
Consumption Power	5.0 W	10.0 W
Dimensions (DxWxH)	132 x 76 x 67mm	140 x 80 x 140mm
Weight	800g	1250g
Duty Cycle	Continuous
Life Expectancy	> 8760 hours
Wafer Size	Up to 6-inch	8 and 12-inch

Accessories:
Electrostatic discharge (ESD) Safe Tubing
Static-Dissipative Grounding Kit

• The 110V pumps have plugs and cords conforming with USA and not CE standards.
• Low vacuum pump applications and selection: some considerations
• These pumps are recommended for use with Silicone Wafer Vacuum Wands
• Swabs on page M8

HEPA filter specifications
Water filtering time: 20s (Do not let the pump "inhale" liquid!); pressure loss: 0.42kPa; trapping efficiency: 99.99% of 0.3µm particles; maximum filter temperature: 120°C Manufacturer is ISO9001 certified.

Note
VFV30-240 and VFV60-240 are suitable for Australia, New Zealand, Europe and other countries with a voltage of 220 - 240V.
VFV30-110 and VFV60-110 are suitable for USA, Canada and other countries with a voltage of 110V.

Supplied with a tube connector and tubing.

VFV30-240 Diaphragm vacuum pump, 300 mmHg, 240V AUD243.00 Availability
VFV30-110 Diaphragm vacuum pump, 300 mmHg, 110V AUD243.00 Availability
VFV60-110 Diaphragm vacuum pump, 600 mmHg, 110V AUD475.00 Availability
VFV60-240 Diaphragm vacuum pump, 600 mmHg, 240V AUD512.00 Available
VFV9-HEPA Replacement HEPA filter kit for VFV30/ 60 AUD35.00 Availability

OIL FREE DIAPHRAGM VACUUM/PRESSURE PUMP, 220V, 50/60Hz
Oil free diaphragm vacuum pump with a 1/8 hp.(95W) ball bearing type motor with internal thermal protector. Capacity: 1.8m³/h (1.1 cfm), Maximum vacuum: -648mm (25.5")Hg, Pressure: 60 psi. 230V, 50/60Hz.
Includes: Internal filter and muffler, pressure and vacuum gauges and regulators, rubber feet, carrying handle and hose nipples.

Troubleshooting guide & parts information

VF3-220 Oil free diaphragm vacuum/pressure pump, 220V, 50/60Hz ask Available
VF3-D Replacement diaphragm for VF3-220 AUD72.00 Availability

ROTARY VANE PUMP V2XZ SERIES
Based on European designs, these are two stage pumps and they are suited for many tasks in laboratories, technical and manufacturing continuous duty applications. They may be used as stand alone units in sputter coaters, vacuum forming and moulding or in refrigeration use. Appropriate size pumps in this series are ideal to back diffusion pumps, turbo molecular pumps and titanium ion getter pumps.

Features

• Compact construction, light weight, low noise.
• A gas ballast valve will rid the pump of water and some other vapours.
• The pump is fitted with an electric valve venting the pump for easy restart and preventing oil suction.
• These pumps are mature technology - they have been perfected over three generations.

Model		V2XZ-025	V2XZ-05	V2XZ-1	V2XZ-2	V2XZ-4	V2XZ-6	V2XZ-8	V2XZ-15	V2XZ-25
Pump speed (L/s)		0.25	0.5	1	2	4	6	8	15	25
Ultimate pressure (Pa)		6x10ˉ¹	6x10ˉ²	6x10ˉ²	6x10ˉ²	6x10ˉ²	6x10ˉ²	6x10ˉ²	6x10ˉ²	6x10ˉ²
Rotary speed (r/min)		1400	1400	1400	1400	1400	1400	1400	1400	1400
Motor power (Kw)		0.12	0.18	0.25	0.37	0.55	0.75	1.1	1.5	2.2
Working voltage (v)		230	230	230	230/380	380	380	380	380	380
Inlet diameter (mm)	I.D.	10	16/8	KF16/8	KF25/8	25/8	25	KF40	50	KF50
	O.D.	15	21/11	21/11	31/11	31/11	31/11	45	55	55
Outlet diameter (mm)	I.D.				19mm
	O.D.				22mm
Dimensions (mm)	Length	403	447	469	474	514	565	565	705	740
	Width	130	168	168	168	168	200	200	338	338
	Height	240	250	260	282	282	342	342	414	414
Weight (kg)		14	15	16	20	24	37	50	80	95

2L/sec = 7.2m³/h (2x60x60/1000)

V2XZ-8, V2XZ-15, and V2XZ-25 are also available - ask.

V2XZ-025 Rotary vane pump, 0.25L/s AUD890.00 Availability
V2XZ-05 Rotary vane pump, 0.5L/s AUD995.00 Availability
V2XZ-1 Rotary vane pump, 1L/s ask Available
V2XZ-2 Rotary vane pump, 2L/s ask Available
V2XZ-4 Rotary vane pump, 4L/s ask Availability
V2XZ-6 Rotary vane pump, 6L/s ask Availability

ROTARY VANE VACUUM PUMP Dual stage, rotary vane, vacuum pumps
The line of quality Rotary Vane pumps will meet your demands for high pumping speed combined with high ultimate vacuum. These dual stage rotary vane pumps are reliable, efficient and competitively priced. High quality engineering has resulted in corrosive-resistant pumps with a compact design coupled to quiet and low vibration operation. These pumps are ideally suited for many applications in labs and small production systems such as analytical instruments, electron microscopes, sputter coaters, carbon coaters, vacuum deposition systems, freeze drying, vacuum ovens and furnaces, or as backing pumps for high vacuum turbo or diffusion pumps.

Features

• 6M³, 12M³ and 24M³ pumping capacity
• Extremely quiet operation
• Virtually vibration free
• Compact design
• Corrosion resistant
• Anti-suck back design
• Multiple voltage motors

Specifications

Cat. No.	VRVP06	VRVP12	VRVP24
Model number	100-3.5	200-7	400-14
Pumping speed	Ideal for sputter coaters, vacuum desiccators and small ovens	Ideal for electron microscopes and backing pumps	Suitable for large volumes and industrial applications
Pumping speed @ 60Hz	100 l/min, 3.5CFM, 6m3/hr	200 l/min, 7CFM, 12m3/hr	400 l/min, 14 CFM, 24m3/hr
Pumping speed @ 50Hz	83 l/min, 3 CFM,5m3/hr	166 l/min, 6 CFM, 10m3/hr	333 l/min, 11.6 CFM, 20m3/hr
Ultimate pressure	6 x 10-4 mbar, 5 x 10-4 Torr	6 x 10-4 mbar, 5 x 10-4 Torr	1 x 10-3 mbar, 1 x 10-3 Torr
Ultimate pressure with gas ballast	6 x 10-2 mbar 5 x 10-2 Torr	6 x 10-2 mbar 5 x 10-2 Torr	6 x 10-2 mbar 5 x 10-2 Torr
Intake & exhaust connection	NW25 / KF25	NW25 / KF25	NW25 / KF25
Oil capacity	500cc	600cc	1500cc
Recommended pumping fluid	We reccomend our rotarty vane pump oil - M007
Motor CE marked	230VAV, 50Hz, 1/2 HP	230VAV, 50Hz, 1/2 HP	230/380VAC, 50Hz, 1 HP
Weight, net	23kg	24kg	32kg
Ambient operating temperature	7° to 40°C	7° to 40°C	7° to 40°C

See dimensions

Accessories

• 891-35 Ultragrade 19 rotary pump oil, for rotary pump models 100-35 and 200-7
• 891-36 Ultragrade 19 rotary pump oil, for rotary pump model 400-14

Adapter cord for connecting pumps to Cressington coaters
92080-10 Adapter Cord, IEC/NEMA 5-15P

All metal connection kit for Cressington 108 series coaters
to the #92080 or #92081 VRL Rotary Vane Pumps
Technical Notes, All Metal Connection Kit (PDF 801KB)
92080-108 All Metal Connection Kit

Dual-VacSet
Connect two Cressington 108 coaters to one #92080 pump
Technical Notes, Dual-VacSet (PDF 556KB)
92080-200 Dual-VacSet for 92080 Pump, fits Cressington 108 Coaters

Rotary Vane ump Oil
We reccomend our mechanical vacuum pump oil - M007

See also our Edwards rotary vane pumps

VRVP06 Rotary vane pump, 6m3/h ask Availability
VRVP12 Rotary vane pump, 12m3/h ask Availability
VRVP24 Rotary vane pump, 24m3/h ask Availability

DRY SCROLL VACUUM PUMPS VEVP series
Scroll pumps provide a clean, completely oil free, medium high vacuum; they can evacuate large spaces and run continuously with least energy expenditure and low wear. These environmentally friendly vacuum pumps offer the best vacuum solutions in their class.

Based on the technology of advanced European vacuum pumps, this dry scroll vacuum pump has been designed, thoroughly researched, and developed to maturity in our manufacturer's large facilities. Application include medical instruments, biological applications like freeze drying and oil- free backing of high vacuum systems, pharmaceutical manufacturing, food industry (drying and condensing), medical packing, recycling of extracted vapours, thin film preparation for the semiconductor, micro-electronics, solar energy sectors.

Features

• Environmentally friendly: no oil, no water, cleanest vacuum with least electricity use.
• Easy to operate, minimal maintenance.
• Efficient in extracting water vapour.
• Extracted vapour may be condensed and used as in perfumery or food production processes.
• Compact construction, easy to install and move.
• Air cooled.
• No reciprocating action results in low vibration and low noise.
• Wide working vacuum range. Continuous function between its ultimate vacuum to near atmospheric pressure.

Cat. No.		VEVP010	VEVP020	VEVP040	VEVP080	VEVP250
Voltage		380V/50Hz	380V/50Hz	380V/50Hz	380V/50Hz	380V/50Hz
Ventilation rate bleed	m3/h	10	20	40	80	250
	L/S	2.8	6	11	22
Ultimate pressure	Pa		80	80	80
	Torr		0.6	0.6	0.6
Power (kw)		0.37	0.75	1.1	2.2	5.5
Rotational speed (rpm)		1400	1400	1400	1400
Inlet diameter (inch)			G1	G1	G1 ½
Outlet diameter (inch)			G½	G½	G1
noise dB (A)		62	65	68	68	76
Dimensions (mm)		440 x 250 x 300	450 x 250 x 300	460 x 250 x 300	650 x 390 x 420	901 x 501 x 570
Weight (kg)		20	22	24	65	125

Spare parts: sealing elements, shaft seal, bearing, lubricating grease

VEVP020, VEVP040, VEVP080, and VEVP250 are also available - ask.

VEVP010 Dry scroll vacuum pump, 10m3/h ask Availability