• Loops and Kolle handles on page T11
• Swabs on page M8
• Scalpel blades on page L6

SILICONE STERILISATION TRAY MAT


Silicone pin mats hold operating instruments in position, supported by soft spines. Lifting instruments off this mat is safer and more positive. Since tools are supported by small protrusions, contaminants are not transferred to other tools but drain through holes in the mat. These mats are easily cleaned and tolerate numerous cycles in an autoclave.

The silicone sterilisation tray mats are manufactured in line with RoHS and FDA standards, and can be used to cushion, protect and organise surgical instruments for sterilisation. Perforations allow for proper exposure and ventilation during the sterilisation process. The silicone pin mats can also be cut into smaller sections to fit any size basket or box.

Silicone is well known for its use in food, pharmaceutical and other clean industry applications and offers many advantages over other elastomers. It is non-toxic, easy to clean and does not retain odours. It is a resilient material, capable of maintaining many of its properties at extremely low and high temperatures (-40°C to 250°C). It is naturally electrically insulating. Silicone is highly tear-resistant and is unaffected by many solvents, including petrol.

TM38 Pin mat, silicone, for sterilisation trays, 380 x 480 x 19mm AUD57.00 Available
TM76 Pin mat, silicone, for sterilisation trays, 760 x 480 x 19mm AUD85.00 Available

MICRO-NEEDLE PROBE SET
The set includes one lightweight, precision handle and four interchangeable hardened steel tools for manipulating, scribing, spring assembly and probing. The precision handle is finely balanced, non-rolling, gold anodized with a split collet mounting and knurled lock nut. Length is 120mm
The precision forged tools are made of hardened nickel-plated tool steel, 40mm long with a 2mm diameter shank reduced to a 0.7mm (0.027") diameter. All tools are tapered to a sharp tip. Plastic container.

T950 Micro-needle probe set AUD38.00 Available
T952 Straight prober AUD9.00 Available

MICRO-TOOL with interchangeable micro-tips, ideal for finest dissections

Micro-Tools are the smallest available precision instruments for laboratory and production use. Micro-Tools are available in different tip configurations with interchangeable tool handle. A threaded (tapped) handle (T900), this holds the tool. The tool is threaded for fixing to the handle, and holds in the case of T901 a needle 15mm x 0.5mm. The last 2mm of the needle are stepped down to only 0.12mm thick, and have a microscopic needle point - see above image. Tools on 0.5mm or larger shanks are not stepped down. Tip material is hardened tool steel unless otherwise noted.

For micro-tool storage box see T900-BOX below.

T900 Micro-tool handle AUD35.00 Available
T901-0025 Micro-needle, long, shank size 0.025mm AUD107.00 Availability
T901-0120 Micro-needle, long, shank size 0.12mm AUD92.00 Available
T901-0250 Micro-needle, long, shank size 0.25mm AUD68.00 Available
T901-0500 Micro-needle, long, shank size 0.5mm AUD51.00 Available
T901-1000 Micro-needle, long, shank size 1.0mm AUD61.00 Available
T902-0120 Micro-engraver, triangular, shank size 0.12mm AUD115.00 Available
T902-0250 Micro-engraver, triangular, shank size 0.25mm AUD96.00 Availability
T902-0500 Micro-engraver, triangular, shank size 0.5mm AUD88.00 Available
T902-1000 Micro-engraver, triangular, shank size 1.0mm AUD90.00 Availability
T903-0025 Micro-chisel, shank size 0.025mm AUD120.00 Availability
T903-0120 Micro-chisel, shank size 0.12mm AUD94.00 Availability
T903-0250 Micro-chisel, shank size 0.25mm AUD76.00 Availability
T903-0500 Micro-chisel, shank size 0.5mm AUD67.00 Availability
T903-1000 Micro-chisel, shank size 1.0mm AUD76.00 Availability
T904-0025 Micro-spade, shank size 0.025mm AUD120.00 Availability
T904-0120 Micro-spade, shank size 0.12mm AUD94.00 Availability
T904-0250 Micro-spade, shank size 0.25mm AUD76.00 Availability
T904-0500 Micro-spade, shank size 0.5mm AUD69.00 Availability
T904-1000 Micro-spade, shank size 1.0mm AUD76.00 Availability
T905-0250 Micro-fork, shank size 0.25mm AUD83.00 Availability
T905-0500 Micro-fork, shank size 0.5mm AUD61.00 Availability
T906-0500 Micro-mirror, forward 20°, Ø 5mm, shank size 0.5mm AUD83.00 Availability
T907-0500 Micro-ruler, 10mm, 0.1mm divisions, shank size 0.5mm AUD87.00 Availability
T908-0025 Micro-knife, 20°, shank size 0.025mm AUD120.00 Availability
T908-0120 Micro-knife, 20°, shank size 0.12mm AUD94.00 Availability
T908-0250 Micro-knife, 20°, shank size 0.25mm AUD76.00 Availability
T908-0500 Micro-knife, 20°, shank size 0.5mm AUD67.00 Available
T908-1000 Micro-knife, 20°, shank size 1.0mm AUD76.00 Availability
T909-0025 Micro-knife, 45°, shank size 0.025mm AUD113.00 Availability
T909-0120 Micro-knife, 45°, shank size 0.12mm AUD94.00 Availability
T909-0250 Micro-knife, 45°, shank size 0.25mm AUD76.00 Availability
T909-0500 Micro-knife, 45°, shank size 0.5mm AUD67.00 Availability
T909-1000 Micro-knife, 45°, shank size 1.0mm AUD76.00 Availability
T910-0500 Micro-mirror, reverse, shank size 0.5mm AUD76.00 Availability
T911-0250 Micro-prober, 90°, shank size 0.25mm AUD74.00 Availability
T911-0500 Micro-prober, 90°, shank size 0.5mm AUD61.00 Availability
T912-0250 Micro-prober, 45°, shank size 0.25mm AUD71.00 Available
T912-0500 Micro-prober, 45°, shank size 0.5mm AUD66.00 Available
T913-0025 Micro-engraver, oval, shank size 0.025mm AUD113.00 Availability
T913-0120 Micro-engraver, oval, shank size 0.12mm AUD94.00 Availability
T913-0250 Micro-engraver, oval, shank size 0.25mm AUD76.00 Availability
T913-0500 Micro-engraver, oval, shank size 0.5mm AUD67.00 Availability
T913-1000 Micro-engraver, oval, shank size 1.0mm AUD76.00 Availability
T914-0500 Micro-brush, single natural fibre, shank size 0.5mm AUD66.00 Available
T915-0250 Micro-diamond scribe, 60°, shank size 0.25mm AUD108.00 Availability
T915-0500 Micro-diamond scribe, 60°, shank size 0.5mm AUD80.00 Available
T916-0500 Micro-spatula, flexible, shank size 0.5mm AUD81.00 Availability
T917-0500 Micro-manipulator, A-type, shank size 0.5mm AUD74.00 Availability
T918-0250 Micro-hook, 90°, shank size 0.25mm AUD77.00 Availability
T918-0500 Micro-hook, 90°, shank size 0.5mm AUD67.00 Availability
T919-0500 Micro-burnisher, glass sphere, shank size 0.5mm AUD58.00 Availability
T920-0250 Micro-hook, 180°, shank size 0.25mm AUD76.00 Availability
T920-0500 Micro-hook, 180°, shank size 0.5mm AUD67.00 Availability
T921-0025 Micro-scraper, triangular, shank size 0.025mm AUD113.00 Availability
T921-0120 Micro-scraper, triangular, shank size 0.12mm AUD94.00 Availability
T921-0250 Micro-scraper, triangular, shank size 0.25mm AUD76.00 Availability
T921-0500 Micro-scraper, triangular, shank size 0.5mm AUD67.00 Availability
T921-1000 Micro-scraper, triangular, shank size 1.0mm AUD76.00 Availability
T922-0500 Micro-saw, shank size 0.5mm AUD67.00 Availability
T923-0500 Micro-scale, 5mm, 0.1mm divisions, shank size 0.5mm AUD104.00 Availability
T924-0025 Micro-needle, short, shank size 0.025mm AUD82.00 Availability
T924-0120 Micro-needle, short, shank size 0.12mm AUD81.00 Available
T924-0250 Micro-needle, short, shank size 0.25mm AUD61.00 Availability
T924-0500 Micro-needle, short, shank size 0.5mm AUD45.00 Availability
T924-1000 Micro-needle, short, shank size 1.0mm AUD61.00 Availability
T925-0120 Ultra micro-needle, tungsten, straight, tip radius 5µm, shank size 0.12mm AUD97.00 Availability
T925-0250 Ultra micro-needle, tungsten, straight, tip radius 5µm, shank size 0.25mm AUD81.00 Availability
T925-0500 Ultra micro-needle, tungsten, straight, tip radius 5µm, shank size 0.5mm AUD72.00 Availability
T926-0120 Ultra micro-needle, tungsten, 30°, tip radius 5µm, shank size 0.12mm AUD101.00 Available
T926-0250 Ultra micro-needle, tungsten, 30°, tip radius 5µm, shank size 0.25mm AUD83.00 Availability
T926-0500 Ultra micro-needle, tungsten, 30°, tip radius 5µm, shank size 0.5mm AUD67.00 Availability
T927-0120 Ultra micro-needle, tungsten, 90°, tip radius 5µm, shank size 0.12mm AUD100.00 Availability
T927-0250 Ultra micro-needle, tungsten, 90°, tip radius 5µm, shank size 0.25mm AUD88.00 Availability
T927-0500 Ultra micro-needle, tungsten, 90°, tip radius 5µm, shank size 0.5mm AUD79.00 Availability
T928-0025 Micro-scribe, tungsten carbide, tip radius 5µm, shank size 0.025mm AUD127.00 Availability
T928-0120 Micro-scribe, tungsten carbide, tip radius 5µm, shank size 0.12mm AUD100.00 Availability
T928-0250 Micro-scribe, tungsten carbide, tip radius 5µm, shank size 0.25mm AUD79.00 Availability
T928-0500 Micro-scribe, tungsten carbide, tip radius 5µm, shank size 0.5mm AUD68.00 Availability
T929-0250 Micro-diamond file, round, shank size 0.25mm AUD96.00 Availability
T929-0500 Micro-diamond file, round, shank size 0.5mm AUD82.00 Availability
T930-0500 Micro-diamond file, triangular, 1mm edge to edge, shank size 0.5mm AUD94.00 Availability
T931-0500 Micro-loop, Ø 2mm, shank size 0.5mm AUD53.00 Availability
T932-0500 Micro-hook, anti-snag guard, shank size 0.5mm AUD74.00 Availability

MICRO-TOOL STORAGE BOX
Hardwood storage box for 8 micro-tool tips and 1 handle.

Note: Tools not included.

T900-BOX Micro-tool storage box for 8 tips and handle AUD93.00 Available

DIAMOND SCRIBES, 60° TIP
60° Diamond tip for very fine markings.
The finish on these scribing tools creates an optimum cutting edge for high accuracy and long life.
Tip is very fine, mounted on a the end of the metal shaft - which extrudes from the tip of the pen - (shaft ~o.7mm in diameter).

T960-60S Diamond scribe, 100mm handle, 60° tip, straight AUD20.00 10% discount for 10 Available
T960-60A Diamond scribe, 100mm handle, 60° tip, angled AUD22.00 10% discount for 10 Available

HARRIS MICRO-PUNCH
The Harris Micro-Punch has a razor sharp cutting tip designed to cut, retrieve and store cored samples from source materials such as tissue, gels, paper, cloth, leaves, paint chips, films or other thin substrates. Ideal for tissue processing or forensic applications. Tips are made from high-carbon steel, heat treated to Rockwell hardness Rc 65 and then individually sharpened. The barrel and knob-screw assembly are constructed from injection moulded, high tech, lubricated plastic to eliminate sticking.
Length 140mm, sterilisation temperature up to 180°C. Each Harris Micro-Punch is sold with a protective plastic tip cover and a 152 x 203 x 1.5mm thick, inert, self-healing Harris cutting mat with dual cutting surfaces.
Replacement tips, plungers and mats can be ordered separately. For mat see Harris Uni-Core below.
Available tip sizes:
0.5, 1.0, 1.2, 2.0 and 3.0mm diameter - Specify size and ask.

T970-05 Harris Micro-Punch, 0.5mm AUD182.00 Availability
T970-05P Replacement plunger, SS, 0.5mm AUD82.00 Availability
T970-05T Replacement tip, 0.5mm AUD80.00 Availability

HARRIS UNI-CORE
The Harris Uni-Core has a razor sharp stainless steel cutting tip designed to cut, retrieve and store cored samples from source materials such as tissue, gels, paper, cloth, leaves, paint chips, films or other thin, soft substrates. The tip is protected by a removable cover cap. The body is made from polypropylene plastic. Each Harris Uni-Core is individually pouched and ethylene oxide sterilised. Two inert, self-healing cutting mats with dual cutting surfaces are sold separately.
The Uni-Core is a reusable, disposable sampling tool (autoclavable 3 to 5 times), ideal for tissue processing or forensic applications. It may be disposed of after use or cleaned and reused.
Cleaning: clean tip between each sample extraction by coring blank filter paper; rinse with ethanol or spray with compressed air to remove dried artefacts. Rinse mat with ethanol after each sample extraction. Autoclave 20 minutes at 120°C and 15 p.s.i.
Alternatively, see Struycken punch-cutting forceps on page T8.

5% discount when buying 5 of one size.

T980-035 Harris Uni-Core, 0.35mm AUD26.00 5% discount for 5 Available
T980-05 Harris Uni-Core, 0.5mm AUD26.00 5% discount for 5 Available
T980-075 Harris Uni-Core, 0.75mm - currently not available AUD24.00 5% discount for 5 Availability
T980-10 Harris Uni-Core, 1.0mm AUD24.00 5% discount for 5 Available
T980-12 Harris Uni-Core, 1.2mm AUD24.00 5% discount for 5 Available
T980-15 Harris Uni-Core, 1.5mm - currently not available AUD24.00 5% discount for 5 Availability
T980-20 Harris Uni-Core, 2.0mm AUD24.00 5% discount for 5 Available
T980-25 Harris Uni-Core, 2.5mm AUD24.00 5% discount for 5 Available
T980-30 Harris Uni-Core, 3.0mm AUD24.00 5% discount for 5 Available
T980-35 Harris Uni-Core, 3.5mm AUD24.00 5% discount for 5 Available
T980-40 Harris Uni-Core, 4.0mm AUD24.00 5% discount for 5 Available
T980-50 Harris Uni-Core, 5.0mm AUD24.00 5% discount for 5 Available
T980-60 Harris Uni-Core, 6.0mm AUD24.00 5% discount for 5 Available
T980-70 Harris Uni-Core, 7.0mm AUD24.00 5% discount for 5 Available
T980-80 Harris Uni-Core, 8.0mm AUD24.00 5% discount for 5 Available
T980-ML Harris cutting mat, 152 x 203mm AUD34.00 Available

SURGICAL KNIFE HANDLES
Bard Parker handles, all stainless steel, matt finish and grooved finger/ thumb grip. Length of handles only: No. 3 - 125mm; No. 4 -135mm; No. 5 - 160mm.

Scalpel blades and a list of matching handles and blades are on page L6.

T133 Scalpel handle No. 3, 125mm AUD6.00 10% discount for 10 Available
T134 Scalpel handle No. 4, 135mm AUD8.00 10% discount for 10 Availability
T135 Scalpel handle No. 5, 160mm AUD7.00 10% discount for 10 Available

RETRACTABLE BLADE SCALPEL HANDLE
Swann-Morton scalpel handle with No.3 fitment, SS, graphite finish. The blade can be fully retracted.
Suits blade profiles 10, 11 - see page L6
The handle comes without blade.

T133R Retractaway scalpel handle, 120mm AUD33.00 Available

DISPOSABLE SCALPELS, SWANN-MORTON
Swann-Morton disposable scalpels, sealed individually in trays, and boxed in units of 10.  The sterile scalpels are individually packaged into a transparent thermo-formed tray, providing improved product visibility and assisting in safe passing techniques. When peeling the packet, the seal changes colour, thus indicating if the integrity of the packet has been breached and assuring the user of sterility up to the point of usage.
Stainless steel blade on polystyrene handle.

TDS134-11 Scalpels with plastic handle, SS, sterile, profile 11, Swann-Morton AUD30.00 /box/10 10% discount for 10 Available
TDS134-22 Scalpels with plastic handle, SS, sterile, profile 22, Swann-Morton AUD30.00 /box/10 10% discount for 10 Available

NEEDLES OR PROBES
Needles are used in dissecting procedures but they are also handy for holding a grid in place during staining procedures.
These are all stainless steel, single piece, probes, with a shaped solid handle and a strong, tapered, well sharpened probe.

For mounted needles and micro lancets also see Kolle handles on page T11.

T151 Mounted needles with sharp point, straight AUD8.00 /pk/2 Availability
T152 Mounted needles with sharp point, curved AUD8.00 /pk/2 Available

DISSECTING SET
A versatile dissecting kit consisting of 8 pieces in a durable tie pouch. Contains:

• 1pr straight dissecting scissors 115mm
• 1pr curved dissecting scissors 125mm
• 1 straight probe
• 1 curved probe
• 1pr splinter forceps 115mm
• 1pr thumb forceps 115mm
• 1 scalpel handle No. 4
• 6 surgical blades

T161 Dissecting set AUD28.00 /set 10% discount for 10 Available