MICRO SIEVE SET
This micro-sieve set consists of a stack of four interchangeable screen-holding sections, a catch pan, and a friction-fit cover. The entire unit is molded of polypropylene All of the parts of the set are very easy to take apart for changing the mesh insert or for cleaning. Complete with the unit are phosphor-bronzed mesh inserts in the following sizes: 25, 35, 45, 60, 80, 120, 170, and 320 mesh. The holding sections are 51mm ID x 152mm H.

Mesh to Micron Conversion Table

S025 Micro sieve set AUD268.00 /set Availability

Thermometers come in an array of shapes, forms, and functionality, so it is important for the user to understand the differences between the varieties available.

Immersion thermometers are classified into two distinct categories, total and partial:
Total immersion thermometers must be completely immersed for accuracy.
Partial immersion thermometers are immersed up to the specified immersion line on the thermometer, which is usually 76mm from the bulb.

LABORATORY THERMOMETERS PARTIAL IMMERSION
Premiere© thermometers for the daily laboratory use; they are simple and versatile.
Non-toxic red-filled thermometers are not as accurate as mercury-filled thermometers, but sufficient for most laboratory applications. An anti-roll device is included with thermometers.

Cat. No.	Measuring range	Length	Colour
STAP-10-110	-10°C to 110°C	305mm	White
STAP-20-110	-20°C to 110°C	305mm	White
STAP-20-150	-20°C to 150°C	305mm	White
STAP-20-102	-20°C to 102°C	305mm	Yellow
STAP-10-102	-10°C to 102°C	152mm	White

Also available with a yellow background - ask.

STAP-10-110 Analogue thermometers, red-filled, partial immersion, -10°C to 110°C AUD12.00 /pk/2 10% discount for 5 Available
STAP-10-102 Analogue thermometers, red-filled, partial immersion, -10°C to 102°C AUD12.00 /pk/2 10% discount for 5 Available
STAP-20-102 Analogue thermometers, red-filled, partial immersion, -20°C to 102°C AUD12.00 /pk/2 10% discount for 5 Available
STAP-20-110 Analogue thermometers, red-filled, partial immersion, -20°C to 110°C AUD12.00 /pk/2 10% discount for 5 Available

LABORATORY THERMOMETERS TOTAL IMMERSION

Cat. No.	Measuring range	Length	Colour
STAT-20-150	-20°C to 150°C	305mm	White
STAT-20-110	-20°C to 110°C	305mm	White

Also available with a yellow background - ask.

STAT-20-150 Analogue thermometers, red-filled, total immersion, -20°C to 150°C AUD12.00 /pk/2 10% discount for 5 Available

XCS EDS Calibration Standards
The XCS EDS calibration standards are practical, high quality and compact EDS calibration standards using a standard type 12.7mm pin stub as retainer. The small size of the pin stub allows for using the XCS calibration standard alongside specimens on readily available multi pin stub holders. This enables quick in-situ calibration and regular performance tests of the EDS system, Back Scattered Electron Detector and light element detection performance of the EDS detector. The pure elements and compounds are mounted in the 12.7mm stubs using a highly conductive silver epoxy. All XCS calibration standards are carbon coated for improved conductivity. The XCS EDS calibration standards are available in 6 fixed configurations:



SXCS-5 is intended for EDS calibration and contains ANSI 316 stainless steel, SiO2, Mn, B, C and a 200µm Cu aperture grid in a 12.7mm aluminium pin stub.

SXCS-6 is intended for EDS calibration and contains ANSI 316 stainless steel, SiO2, Mn, B, C and a 200µm Cu mesh grid in a 12.7mm aluminium pin stub.

SXCS-7 is intended for BSD response curve calibration for GSR and contains, Ge, Nb, Au, C, Si and a 200µm Cu aperture grid in a 12.7mm aluminium pin stub.
Representative Certificate of Suitability for Purpose - for XCS-7 Calibration Standard (274KB PDF)

SXCS-8 is intended for EDS calibration and contains ANSI 316 stainless steel, SiO2, Mn, BN, C and a 200µm Cu aperture in a 12.7mm aluminium pin stub.
Representative Certificate of Suitability for Purpose - for XCS-8 Calibration Standard (279KB PDF)

SXCS-10 is intended for BSD response curve calibration and contains C, Si, Ti, Co, Ge, Nb, Sn, Ho, Ir, Bi and a 200µm Cu aperture in a 12.7mm aluminium pin stub.
Representative Certificate of Suitability for Purpose - for XCS-10 Calibration Standard (273KB PDF)

SXCS-12 is intended for checking light element analysis performance and contains CaB6, SiC, CrN, Fe2O3, CaF2 and a 200µm Cu aperture in a 12.7mm aluminium pin stub.
Representative Certificate of Suitability for Purpose - for XCS-12 Calibration Standard (244KB PDF)

Each XCS EDS X-ray calibration standard comes with a certificate issued by the manufacturer stating the purity and origin of the elements, compounds or alloys. The ANSI 316 stainless steel is NBS SRM 1155 (standard reference material) which is traceable to NIST. The other elements, compounds or alloys are not NIST traceable.

Composition for NBS SRM 1155 ANSI 316 Stainless Steel
C = 0.044%	V = 0.047%	Ni = 12.26%
Si = 0.509%	Cr = 18.46%	Co = 0.12%
P = 0.02%	Mn = 1.64%
M0 = 2.38%	Fe = 64.345%

SXCS-5 XCS-5 EDS calibration standard with SS316, SiO2, Mn, B, C, 200µm aperture AUD479.00 Availability
SXCS-10 XCS-10 BSD response calibration with C, Si, Ti, Co, Ge, Nb, Sn, Ho, Ir, Bi ask Availability
SXCS-12 XCS-12 EDS performance standard with CaB6, SiC, CrN, Fe2O3, CaF2, 200µm ask Availability
SXCS-6 XCS-6 EDS calibration standard with SS316, SiO2, Mn, B, C and Cu grid AUD479.00 Availability
SXCS-7 XCS-7 BSD response calibration standard with Ge, Nb, Au, C, Si and 200µm AUD747.00 Availability
SXCS-8 XCS-8 EDS calibration standard with SS316, SiO2, Mn, BN, C, 200µm aperture AUD517.00 Availability