• Glass tubes, vials & jars on L10
• Tube racks and boxes on page L12
• More microtubes on page Y1
• Cryotube box on page Y1
  
  click here for Properties of Plastics
  Vials for use at very low temperatures can be found in our Cryotechniques chapter.

PCR TUBES, PP, CONICAL, ATTACHED CAP
Features

• Manufactured from tough, virgin polypropylene
• Designed for an optimal fit in all commonly used thermal cyclers
• Ultra thin wall allows precise thermal transfer
• Tab for easy opening and closing
• Flat cap
• Autoclavable

LCA09-02 PCR tubes, PP, attached cap, 0.2mL AUD24.00 /pk/1000 15% discount for 10 Available

MICROTUBES WITH ATTACHED PUSH-IN CAP
Autoclavable polypropylene microtubes, graduated.

Cat. No.	Volume (mL)	Height (mm)	External Ø (mm)	Internal Ø (mm)
LCA09-15	1.5	40	10.6	9
LCA09-05	0.5	30	7.6	6.4

LCA09-05 Microtubes, PP, attached cap, conical, 0.5mL AUD20.00 /pk/1000 20% discount for 6 Available
LCA09-15 Microtubes, PP, attached cap, conical, 1.5mL AUD17.00 /pk/500 15% discount for 10 Available

CENTRIFUGE TUBE WITH ATTACHED PUSH-IN CAP
Autoclavable polypropylene microtube, round bottom, graduated.

Cat. No.	Volume (mL)	Height (mm)	External Ø (mm)	Internal Ø (mm)
LCA07	5	53	16	12

LCA07 Centrifuge tubes, PP, round bottom, attached cap, 5mL AUD24.00 /pk/300 20% discount for 10 Available

MICRO CENTRIFUGE TUBES WITH ATTACHED SCREW CAPS
These microtubes have a conical bottom and are not graduated. Captive screw cap has a silicone seal. Sterile.

Cat. No.	Volume (mL)	Height (mm)	External Ø (mm)	Internal Ø (mm)
LCA05-G	1.5	56.5	10	8
LCA05-O

LCA05-G Microtubes, PP, conical, sterile, 1.5mL, green attached screw cap AUD39.00 /pk/500 10% discount for 5 Available
LCA05-O Microtubes, PP, conical, sterile, 1.5mL, orange attached screw cap AUD38.00 /pk/500 10% discount for 5 Available

MICROTUBES, PP, CONICAL, ATTACHED SAFE-LOCK CAPS
Features

• Manufactured from tough virgin polypropylene
• Unique safe-lock cap ensures excellent safety when handling
• Comfort tab for easy opening and closing
• Graduated
• Frosted writing area for labelling
• Autoclavable

LCA10-05 Microtubes, PP, conical, attached safe-lock cap, 0.5mL AUD25.00 /pk/1000 20% discount for 10 Available
LCA10-15 Microtubes, PP, conical, attached safe-lock cap, 1.5mL AUD18.00 /pk/500 15% discount for 10 Available
LCA10-15B Microtubes, PP, conical, safe-lock cap, 1.5mL, blue capinsert AUD22.00 /pk/500 15% discount for 10 Available
LCA10-20 Microtubes, PP, round bottom, attached safe-lock cap, 2.0mL AUD21.00 /pk/500 20% discount for 10 Available

MICROTUBES, PP, CONICAL, NO CAP
Manufactured from tough virgin polypropylene, autoclavable.

LCA08-15 Microtubes, PP, conical, no cap, 1.5mL AUD26.00 /pk/1000 20% discount for 10 Available

MICROTUBE OPENING TOOL FOR 0.5 TO 2.2ML TUBES
Polypropylene microtube opener for quick and easy opening of microtubes. Autoclavable.

LCA05-TOOL Microtube opening tools for 0.5 to 2.2mL tubes, PP AUD14.00 /pk/2 10% discount for 10 Available

BREATHABLE MEMBRANES FOR MICROTUBES

Features

• Ideal for cell growth and freeze drying
• Permits consistent gas exhange
• Easy microtube cap closure
• Will not bind in centrifuge rotors
• Easy-to-use finger tab for quick liner removal
• Pre-cut to fit a variety of popular tube sizes
• Sterile and free of cytotoxin
  
  

Breathe-Easy™ polymer-type membrane offers a water vapour transmission rate of 0.7 kg/ m2/24 hours.
Breathe-Easier™ (a white non-woven rayon membrane) transmits water vapour 6 times faster than Breathe-Easy™ for accelerated growth.

Film type	Breathe-Easy™	Breathe-Easier™
Ideal use	Cell culture	Cell culture
Temperature range	-80°C to 100°C	-20°C to 80°C
Thickness	1 mil	5.5 mil
Material	polyurethane	non-woven rayon
Gas-permeable	yes	yes
UV-transparent	to 300nm	no

• Breathe-Easy™ sealing films for culture plates on page H5

LCA05M-BE Breathe-Easy™ permeable membranes for microtubes AUD66.00 /pk/100 Available
LCA05M-BR Breathe-Easier™ permeable membranes for microtubes AUD66.00 /pk/100 Available

CENTRIFUGE TUBES, STERILE with screw caps

Cat. No.	Volume (mL)	Height (mm)	External Ø (mm)	Internal Ø (mm)
LCA01	50	118	28.5	27
LCA02	50
LCA04	15	120	16.5	14.5

LCA01 Centrifuge tubes, PP, conical free-standing, sterile, 50mL AUD22.00 /pk/50 20% discount for 10 Available
LCA02 Centrifuge tubes, PP, conical, sterile, 50mL AUD21.00 /pk/50 20% discount for 10 Available
LCA04 Centrifuge tubes, PP, conical, sterile, 15mL AUD23.00 /pk/100 20% discount for 12 Available

CENTRIFUGE TUBES, PP, CONICAL FREE-STANDING, MOULDED GRADUATIONS
These free-standing, conical tubes are made of ultra-clear PP with HDPE caps. They are leak-proof and have moulded graduations and a writing panel.

Specifications
Graduation range: 5 - 47.5mL
Graduation interval: 2.5mL
Autoclavable: to 121°C
Freezable: to -45°C
Maximum RCF: 7,000xg
Dimensions: Ø 29mm x L115mm
DNase/RNase-free
Non-pyrogenic
FDA registered

LCA03-50 Centrifuge tubes, PP, conical free-standing, moulded graduations, 50mL AUD20.00 /pk/50 20% discount for 10 Available

CENTRIFUGE TUBE, PET, CONICAL, 15ML
These conical-bottom tubes are made of medical grade polyethylene terephthalate. Cap material is HDPE.
Features

• Leakproof
• Black printed graduations with large white labelling area
• Sterile
• Excellent optical clarity
• Scratch resistant
• Solvent resistant
• Dnase/Rnase-free
• Non-pyrogenic＜0.25 EU/mL
• FDA registered
• Autoclavable
• Withstands freezing to -45°C

Tip graduation range	0.1-1mL
Tip graduation interval	0.1mL
Tube graduation range	1.5-14.5mL
Tube graduation interval	0.5mL
Dimensions	Ø 17 x L 115mm
Maximum RCF	11,500xg

LCA04-15PET Centrifuge tubes, PET, conical, screw cap, sterile, 15mL AUD20.00 /pk/50 20% discount for 10 Available

AMBER CENTRIFUGE TUBE, PP, CONICAL, STERILE, 15ML
These conical-bottom tubes are made of opaque, amber polypropylene. Cap material is HDPE. Significantly reduced light penetration makes these tubes ideal for storage of light sensitive materials or for applications involving light sensitive reactions.

Features

• Leakproof
• White printed graduations with large white labelling area
• Sterile
• Dnase/Rnase-free
• Non-pyrogenic＜0.25 EU/mL
• FDA registered
• Autoclavable
• Withstands freezing to -45°C

Tube graduation range	1.5-14.5mL
Tube graduation interval	0.5mL
Dimensions	Ø 17 x L 118mm
Maximum RCF	10,000xg

LCA04-15A Centrifuge tubes, PP, conical, screw cap, sterile, amber, 15mL AUD16.00 /pk/50 20% discount for 10 Available

LARGE CENTRIFUGE TUBES AND STOPPERS
Large, round bottom, rimmed centrifuge tubes, PP, with optional PE stoppers. Autoclavable. Can withstand temperatures up to 120°C. High chemical resistance. Can also be used as conventional test tubes. Very good translucency.

Cat. No.	Volume (mL)	Height (mm)	External Ø (mm)
LCA12-070	70	100	35
LCA12-110	110	120	40

LCA12-070 Centrifuge tubes, PP, 70mL AUD19.00 /pk/5 10% discount for 4 Available
LCA12-070C Stoppers for 70mL centrifuge tubes, PE AUD7.00 /pk/20 Available
LCA12-110 Centrifuge tubes, PP, 110mL AUD21.00 /pk/5 10% discount for 5 Available
LCA12-110C Stoppers for 110mL centrifuge tubes, PE AUD8.00 /pk/25 Available

TEST TUBES, PS, round base.
Supplied without lids/ stoppers. Polystyrene is glass clear, hard and is resistant to most acids and alkalis. It is not autoclavable and does not resist a large range of organic solvents.

LCB09 Test tubes, PS, 12 x 78mm - discontinued /pk/500
LCB29 Graduated test tubes, PS, 12 x 75mm, 2mL AUD7.00 /pk/100 15% discount for 5 Available

TEST TUBES, PS, round base
Glass-clear polystyrene test tubes. Supplied without lids/ stoppers - 13mm caps are available. The loose fitting cap LCB38 is suitable for LCB04; volume 8mL. Polystyrene is glass clear, hard and is resistant to most acids and alkalis. It is not autoclavable and does not resist a large range of organic solvents.

Cat. No.	Volume (mL)	Height (mm)	External diameter (mm)	Internal diameter (mm)
LCB04	8	99.4	12.6	10.6

LCB04 Test tubes, PS, 13 x 100mm, 8mL AUD23.00 /pk/300 20% discount for 10 Available

TEST TUBES plastic
These economical tubes are formed from sections of plastic tubing and have a hexagonal pattern at the base on the inside.

LCB12 Test tubes, PP, 12 x 75mm AUD16.00 /pk/500 20% discount for 10 Available

RIMLESS TEST TUBES, PP
Manufactured from virgin polypropylene. These rimless tubes can withstand centrifugation speeds over 3000xg and temperatures up to 121°C.

LCB12-03 Test tubes, PP, 12 x 60mm, 3mL AUD21.00 /pk/500 20% discount for 10 Available
LCB12-05 Test tubes, PP, 13 x 75mm, 5mL AUD23.00 /pk/500 20% discount for 10 Available
LCB12-08 Test tubes, PP, 13 x 100mm, 8mL AUD21.00 /pk/250 20% discount for 8 Available
LCB12-14 Test tubes, PP, 16 x 100mm, 14mL AUD25.00 /pk/250 20% discount for 8 Available

SOFT TEST TUBES
Polyethylene is familiar from milk bottles and is used in these very economical tubes. PE is highly solvent resistant and translucent. It is not autoclavable.

Tube LCB27 can fit cap LCB38. It is a snug fit though, and you have to ease the lip of the tube into the cap. Luckily, it is a soft tube and can be accomplished easily enough.

LCB26 Soft test tubes, PE, 10 x 100mm AUD9.00 /pk/200 10% discount for 10 Available
LCB27 Soft test tubes, PE, 15 x 100mm AUD12.00 /pk/320 10% discount for 6 Available

TEST TUBE COVER, Ø14mm
LCB38 Test tube cover, PP, 14mm AUD9.00 /pk/100 30% discount for 5 Available

SMALL VIALS, PE with attached cap
Excellent seal with captive closure. For storage of small specimens or a special mould.
May be used to store non-volatile liquids or solids. Moisture proof. Smallest vial holds one EM grid.

Available sizes:

Cat. No.	Volume (mL)	Length x OD (mm)
L21441	0.3	13 x 7
L21445	1.6	25 x 11
L21449	2.0	30 x 12
L21457	8.4	55 x 16

Inquire about these sizes

L21445 PE Vials and cap, 25mm x 11mm OD, 1.6mL AUD57.00 /pk/100 10% discount for 5 Available

SCINTILLATION VIALS, HDPE
Opaque, high-density polyethylene vials. The screw caps are 22-400, made from polypropylene with a foam-polyethylene liner.

Cat. No.	Volume (mL)	Height with cap (mm)	Ø (mm)
L230	20	61	27

L230 Scintillation vials, HDPE, 20mL AUD95.00 /pk/100 10% discount for 5 Available

SCINTILLATION VIALS, PET
For optimal performance in the laboratory, PET plastic vials provide a combination of features previously unavailable in a counting vials. Safe disposal is accomplished by incineration. No harmful gas is generated (only CO2 and H2O are created). These vials are lightweight, virtually unbreakable with the clarity of glass. PET vials also offer low permeability to solvents and minimal background count. These vials hold 20mL of fluid and measure 27mm diameter x 61mm height (with cap). The screw caps are 22-400, made from polypropylene with a foam-polyethylene liner. The vials and the caps are packaged separately.

L236 Scintillation vials, PET, 20mL AUD147.00 /pk/100 10% discount for 5 Available

SAMPLE VIAL, PP, SNAP-ON CAP, PE, 18ML
Excellent quality PP sample vials with PE snap-on caps. Made by VITLAB of Germany.
These vials have the precise measurements required for the Agilent integrated autosampler used with their inductively coupled plasma mass spectrometers.

Cat. No.	Volume (mL)	Height (mm)	Diameter (mm)
L238-018	18	57	22

L238-018 Sample vial, PP, snap-on cap, PE, 18mL AUD48.00 /pk/25 15% discount for 10 Available

STERILE SAMPLE VIALS WITH SCREW CAPS, 7ML
These sample vials with screw caps are made of polypropylene and are available labelled and unlabelled.
Features

• Manufactured from virgin polypropylene
• All materials are non-cytotoxic
• Ideal for small volume samples
• Sterile
• CE marked in accordance with the European Directive 98/79/EC
• Leakproof-tested in accordance with BS5213:1975(1989) Appendix A
• Available labelled and non-labelled

Cat. No.	Volume (mL)	Height (mm)	External Ø (mm)	Internal Ø (mm)	Cap Outer Ø	Labelled
LS21-07	7	50	17	15	22.5	No
LS21-07L						Yes

LS21-07 Sample vials with screw cap, PP, 7mL, sterile AUD17.00 /pk/100 20% discount for 7 Available
LS21-07L Sample vials with screw cap, PP, 7mL, sterile, labelled AUD18.00 /pk/100 20% discount for 7 Available

STERILE SAMPLE TUBES, 30mL
Conical bottom, free-standing, sterile, labelled and unlabelled, 30mL, PP.
OD25mm
LS22-30 Sample tubes, PP, conical bottom free-standing, sterile, 30mL AUD21.00 /pk/50 10% discount for 8 Available
LS22-30L Sample tubes, PP, conical bottom free-standing, sterile, 30mL, labelled AUD21.00 /pk/50 10% discount for 8 Available

ROUND BASE TUBE, PC with screw cap, 5mL
Blood sample tube - round base polycarbonate with polypropylene cap.

Cat. No.	Volume (mL)	Height (mm)	Wide (mm)
LC7512-T-UU	5	75	12

LC7512-T-UU Blood sample tubes, PC, round base, w/PP screw cap, 5mL AUD18.00 /pk/100 25% discount for 5 Available

SAMPLE TUBES, PC, SCREW CAP, ROUND BOTTOM
Polycarbonate, unlabelled sample tubes with PP screw caps, Ø 15mm, length 100mm.

LC76-10 Sample tubes, PC, screw cap, round bottom, 10mL AUD20.00 /pk/100 15% discount for 10 Available

VIALS WITH CAPS, PS
LCB19: Plug is loose fitting and is sufficient as a cover, but would require taping for transportation.
LCB18: Snap-on cap is tight fitting.

LCB19 Vials with push-in cap, PS, 12 x 55mm AUD32.00 /pk/500 20% discount for 10 Available

SAMPLE VIALS, PC, SCREW CAP
Polycarbonate sample vials with screw caps, Ø 25mm, length 92mm.

LS23-30 Sample vials, PC, screw cap, 30mL AUD39.00 /pk/100 15% discount for 10 Available

FLAT BOTTOM CONTAINERS with screw cap, 25mL
This versatile screw cap container is ideal for storage and collection of a wide range of specimens.

Cat. No.	Volume (mL)	Height (mm)	Width (mm)
LP5527-UU	25	55	27

LP5527-UU Flat bottom containers, PP, PE screw cap, 25mL, unlabelled AUD39.00 /pk/100 10% discount for 5 Available

SAMPLE CONTAINERS, PS, WITH METAL SCREW CAP, 60mL
The metal cap is lined with a ring of PVC.


LS20S-060 Sample containers, PS, metal screw cap, sterile, 60mL AUD33.00 /pk/60 15% discount for 5 Available
LS20S-060L Sample containers, PS, metal screw cap, sterile, 60mL, labelled AUD35.00 /pk/60 15% discount for 5 Available

SAMPLE CONTAINERS, PP, 60ML, STERILE
Features

• Manufactured from virgin polypropylene
• All materials are non-cytotoxic
• CE marked in accordance with European Directive 98/79/EC
• Leakproof tested in accordance with BS5213:1975(1989) Appendix A
• Unique PE cap ensures exceptional leakproof seal

LS26-60 Sample containers, PP, 60mL, sterile AUD22.00 /pk/60 10% discount for 5 Available
LS26-60L Sample containers, PP, 60mL, sterile, labelled AUD23.00 /pk/60 10% discount for 5 Available

SPECIMEN CONTAINERS, 70ML
Features

• Manufactured from virgin polystyrene and polypropylene
• All materials are non-cytotoxic
• Ideal for specimen collection and transportation
• Dual threaded caps for a leak resistant seal

Cat. No.	Volume (mL)	Height (mm)	Body Diameter (mm)	Lid Diameter (mm)
All	70	55.7	44	50

LS25-70P Specimen containers, PP, 70mL AUD17.00 /pk/50 15% discount for 10 Available
LS25-70PL Specimen containers, PP, 70mL, labelled AUD19.00 /pk/50 15% discount for 10 Availability
LS25-70S Specimen containers, PS, 70mL AUD17.00 /pk/50 15% discount for 10 Available
LS25-70SL Specimen containers, PS, 70mL, labelled AUD19.00 /pk/50 15% discount for 10 Available

SPECIMEN CONTAINER, PP with PE screw cap, 70mL
This polypropylene container is leakproof  and safe for laboratory use, eg. the collection and transport of biological specimens such as urine, sputum and tissue.

Cat. No.	Volume (mL)	Height (mm)	Width (mm)
LP5744-UL	70	57	44

LP5744-UL Specimen containers, PP, yellow PE screw cap, 70mL AUD32.00 /pk/50 10% discount for 10 Available

SAMPLE CONTAINER, PS with PE screw cap, 250mL
These flat bottom polystyrene containers are designed for the safety. Consideration was given to elimination of leaks in the transportation to and from laboratories by manufacturing to strict quality and inspections.

Cat. No.	Volume (mL)	Height (mm)	Width (mm)
LS10065-UL	250	100	65

LS10065-UL Sample containers, PS, PE screw cap, 250mL AUD28.00 /pk/10 10% discount for 10 Available

SPECIMEN CONTAINERS
The press-on PE cap and the screw-on caps make an excellent seal. Colours may differ. Containers do not leak when inverted. Drip ring acts as a second seal against the lid. Non-sterile.
LCH04 and LCH10 have a textured plastic writing panel 22 x 35mm & 45 x 34mm respectively, accepts pencil.

Cat. No.	Capacity	Moulded graduation	Cap	Dimensions	Carton quantity
LCH04	40mL	Every 10mL to 40mL	Push-on	Top OD including lid 48mm, base OD 35mm, H including lid 49mm	500
LCH06	60mL	Every 20mL to 60mL	Screw	Top OD including lid 50mm, base OD 43mm, H including lid 57mm	500
LCH10	100mL	Every 20mL to 120mL	Screw	Top OD including lid 61mm, base OD 48mm, H including lid 75mm	400
LCH15	150mL	Every 20mL to 120mL	Screw	Top OD including lid 58.5mm, base OD 52mm, H including lid 79.5mm	N/A
LCH25	250mL	Every 50mL to 200mL	Screw	Top OD including lid 65mm, base OD 58.5mm, H including lid 99.5mm	N/A

A 25% discount applies to full cartons of LCH04, LCH06 and LCH10.

LCH04 Sample containers, PP, 40mL AUD8.00 /pk/20 15% discount for 10 Available
LCH06 Sample containers, PP, 60mL AUD9.00 /pk/20 15% discount for 10 Available
LCH06L Sample containers, PP, 60mL, labelled AUD9.00 /pk/20 15% discount for 10 Available
LCH10 Sample containers, PP, 100mL AUD10.00 /pk/20 15% discount for 10 Available
LCH15 Sample containers, PP, 150mL AUD9.00 /pk/10 15% discount for 10 Available
LCH25 Sample containers, PP, 250mL AUD12.00 /pk/10 15% discount for 10 Available

SAMPLE CONTAINERS, PP, GRADUATED
Features

• Made of non-cytotoxic polypropylene
• Ideal for liquid specimen collection, transportation and storage
• Leakproof
• Serrated top and bottom grip ensures easy opening and closing when wearing gloves
• Graduated on 3 sides

Cat. No.	Volume (mL)	Height (mm)	Body Diameter (mm)	Lid Diameter (mm)
LS24-020	20	43.8	31.4	37.5
LS24-040	40	42	44.2	50.5
LS24-060	60	60.3	43.9	50.8
LS24-090	90	75.8	44.1	50.4
LS24-120	120	80.6	51.9	58.2

LS24-020 Sample containers, PP, graduated, 20mL AUD17.00 /pk/100 15% discount for 10 Available
LS24-040 Sample containers, PP, graduated, 40mL AUD13.00 /pk/50 15% discount for 10 Available
LS24-060 Sample containers, PP, graduated, 60mL AUD16.00 /pk/50 15% discount for 10 Available
LS24-090 Sample containers, PP, graduated, 90mL AUD13.00 /pk/30 15% discount for 10 Available
LS24-120 Sample containers, PP, graduated, 120mL AUD14.00 /pk/30 15% discount for 10 Availability