Write-on label tape on page L1

TOUGH-TAGS®
Tough-Tags® are chemically inert polyester labels which adhere strongly to all plastics and other materials. They are temperature resistant from 121°C to -40°C. These labels will withstand autoclaving, boiling water baths, freezer temperatures, organic solvents, caustic agents and other challenges without peeling, cracking or falling off. For best adhesion it is recommended that siliconised surfaces be avoided.
Tough-Tags® are precut, peel-off labels which accept any marking instrument and are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes with Tough-Tags® wrapped around them will slide easily in and out of rotors. Labels are thin and the adhesive does not migrate from behind the label even after boiling and autoclaving.

Teeny Tough Tags®, for 0.2mL PCR tubes, 21 x 6mm, roll/1500

I101 Teeny Tough-Tags®, 21 x 6mm, white AUD58.00 /1500 Available

LASER TOUGH-TAGS® FOR MICROSCOPE SLIDES
Temperature-resistant - From -40°C to 121°C. Tough-Tags® resist boiling water baths, autoclaving and moderate freezer temperatures.

Tough - Chemically inert, polyester sheets resist most organic solvents and caustic agents. They adhere to most plastics, glass and metals without cracking, peeling or degrading.

Compatible - Tubes labelled with Tough-Tags® easily slide in and out of centrifuge rotors without binding.

Specially designed - Label sheets are specially top-coated to readily accept laser printing. Heat-resistant, stay-flat sheets will not jam in laser printers.

The 22 x 22mm labels are ideal for microscope slides and general purpose.
96 Labels/sheet.

I0922-B Laser Tough-Tags®, 22 x 22mm, blue AUD131.00 /pk/2400 Available
I0922-G Laser Tough-Tags®, 22 x 22mm, green AUD131.00 /pk/2400 Available
I0922-O Laser Tough-Tags®, 22 x 22mm, orange AUD131.00 /pk/2400 Available
I0922-R Laser Tough-Tags®, 22 x 22mm, red AUD131.00 /pk/2400 Available
I0922-W Laser Tough-Tags®, 22 x 22mm, white AUD131.00 /pk/2400 Available
I0922-Y Laser Tough-Tags®, 22 x 22mm, yellow AUD131.00 /pk/2400 Available
I0922-Z Laser Tough-Tags®, 22 x 22mm, rainbow AUD131.00 /pk/2400 Available

LASER CRYO LABELS for -196°C to 150°C
These flexible polyolefin labels withstand conventional and cryogenic storage conditions (vapour and liquid phase nitrogen storage at -196°C ). They are chemically inert with a solvent resistant acrylic adhesive which adheres to most plastics, glass and metals. They withstand boiling water baths at 100°C and dry heat up to 150°C without cracking, peeling or degrading.
The labels resist most detergents and oils, as well as many organic solvents, caustic agents and other challenges without peeling. They will resist water soaking for at least 24 hours at room temperature and water vapour (100% relative humidity) at 35°C for at least 24 hours.
The label sheets are specially designed to permanently accept laser printing.
Sheet size is 216 x 279mm (US Letter size when printing).
.
The rainbow pack includes 4 sheets each of blue, green, red and yellow.

100% Virgin polypropylene tubes are recommended. Avoid the use of siliconised surfaces.

I102 Cryo-Babies® are ideal for 0.5mL tubes, 119 labels/sheet
I103 Cryo-Babies® are ideal for 1.5mL tubes, 85 labels/sheet

I102-B Laser Cryo-Babies®, 24 x 13mm, blue AUD119.00 /pk/2380 Available
I102-G Laser Cryo-Babies®, 24 x 13mm, green AUD119.00 /pk/2380 Available
I102-R Laser Cryo-Babies®, 24 x 13mm, red AUD119.00 /pk/2380 Available
I102-W Laser Cryo-Babies®, 24 x 13mm, white AUD119.00 /pk/2380 Available
I102-Y Laser Cryo-Babies®, 24 x 13mm, yellow AUD118.00 /pk/2380 Available
I102-Z Laser Cryo-Babies®, 24 x 13mm, rainbow AUD119.00 /pk/2380 Available
I103-B Laser Cryo-Babies®, 33 x 13mm, blue AUD116.00 /pk/1700 Available
I103-G Laser Cryo-Babies®, 33 x 13mm, green AUD116.00 /pk/1700 Available
I103-R Laser Cryo-Babies®, 33 x 13mm, red AUD116.00 /pk/1700 Available
I103-W Laser Cryo-Babies®, 33 x 13mm, white AUD115.00 /pk/1700 Available
I103-Y Laser Cryo-Babies®, 33 x 13mm, yellow AUD118.00 /pk/1700 Available
I103-Z Laser Cryo-Babies®, 33 x 13mm, rainbow AUD116.00 /pk/1700 Available

CRYO-BABIES® AND CRYO-TAGS® ON A ROLL
Convenient - Dispensing box assists in labelling individual tubes used in small experiments.
Easy to write on - PVC labels accept writing from most lab markers including solvent resistant pens.

I102-W-R Cryo-Babies®, 24 x 13mm, white AUD62.00 /roll/1000 Available
I103-W-R Cryo-Babies®, 33 x 13mm, white AUD62.00 /roll/1000 Availability
I1238-W-R Cryo-Tags®, 38 x 19mm, white AUD62.00 /roll/1000 Available

LASER CRYO-TAGS®
The larger Cryo-Tags® are ideal for cryovials and general purpose.
I1238 = 60 labels/sheet
I1243 = 52 labels/sheet

I1238-B Laser Cryo-Tags®, 38 x 19mm, blue AUD123.00 /pk/1200 Available
I1238-G Laser Cryo-Tags®, 38 x 19mm, green AUD123.00 /pk/1200 Available
I1238-R Laser Cryo-Tags®, 38 x 19mm, red AUD123.00 /pk/1200 Available
I1238-W Laser Cryo-Tags®, 38 x 19mm, white AUD123.00 /pk/1200 Available
I1238-Y Laser Cryo-Tags®, 38 x 19mm, yellow AUD123.00 /pk/1200 Available
I1238-Z Laser Cryo-Tags®, 38 x 19mm, rainbow AUD123.00 /pk/1200 Available
I1243-B Laser Cryo-Tags®, 43 x 19mm, blue AUD123.00 /pk/1040 Available
I1243-G Laser Cryo-Tags®, 43 x 19mm, green AUD123.00 /pk/1040 Available
I1243-R Laser Cryo-Tags®, 43 x 19mm, red AUD123.00 /pk/1040 Available
I1243-W Laser Cryo-Tags®, 43 x 19mm, white AUD123.00 /pk/1040 Available
I1243-Y Laser Cryo-Tags®, 43 x 19mm, yellow AUD121.00 /pk/1040 Available
I1243-Z Laser Cryo-Tags®, 43 x 19mm, rainbow AUD121.00 /pk/1040 Available

LASER CRYO-TAGS® FOR MICROPLATES
The 38 x 6mm labels are ideal for culture plates, 156 labels/sheet.

I1338-B Laser Cryo-Tags®, 38 x 6mm, blue AUD119.00 /pk/3120 Available
I1338-G Laser Cryo-Tags®, 38 x 6mm, green AUD119.00 /pk/3120 Available
I1338-R Laser Cryo-Tags®, 38 x 6mm, red AUD119.00 /pk/3120 Available
I1338-W Laser Cryo-Tags®, 38 x 6mm, white AUD119.00 /pk/3120 Available
I1338-Y Laser Cryo-Tags®, 38 x 6mm, yellow AUD119.00 /pk/3120 Available
I1338-Z Laser Cryo-Tags®, 38 x 6mm, rainbow AUD119.00 /pk/3120 Available

LASER CRYO-TAGS® TOUGH-SPOT SET
These label sets are ideal for 1.5mm cryotubes, 68 labels per sheet.
The set comprises a 33 x 13mm label for the tube and a Ø 9.5mm spot for the cap.

I1433-SET Laser Cryo-Tags® Tough-Spot Set, 33 x 13mm with 9.5mm spot, white AUD120.00 /pk/1360 Available

TOUGH-SPOTS® FOR MICROTUBES

I19-09-B Tough-Spots®, Ø 9.5mm, blue AUD49.00 /roll/1000 Available
I19-09-G Tough-Spots®, Ø 9.5mm, green AUD49.00 /roll/1000 Available
I19-09-O Tough-Spots®, Ø 9.5mm, orange AUD49.00 /roll/1000 Available
I19-09-R Tough-Spots®, Ø 9.5mm, red AUD49.00 /roll/1000 Available
I19-09-Y Tough-Spots®, Ø 9.5mm, yellow AUD49.00 /roll/1000 Available

LASER CRYO-TAGS® FOR MICROSCOPE SLIDES
The 25 x 25mm cryo labels are ideal for microscope slides, 80 labels per sheet.

I1525-W Laser Cryo-Tags®, 25 x 25mm, white AUD123.00 /pk/1600 Available

LASER CRYO-CLEAR™ LABELS
Contents of vials under labels remain visible. Temperature-resistant from -196°C to 70°C. Cryo-Clear™ labels remain fully adhered down to -196°C (liquid and vapour phase nitrogen).

Durable - Chemically inert labels resist most organic solvents and caustic agents. Labels adhere to plastics*, glass and metals without cracking, peeling or degrading.

Laser printable - Label sheets are specially top-coated to accept laser printing and other markings. Heat-resistant, stay-flat sheets will not jam in laser printers.

Innovative - Made with a flexible, vinyl label material and permanent acrylic adhesive. This unique combination expands and contracts together as temperatures fluctuate resulting in a strong and sustained adhesive bond.

* NOTE: Siliconised surfaces should be avoided. Apply to clean, dry tubes at room temperature. Tubes made of 100% virgin polypropylene are recommended.

I1624-C Laser Cryo-Clear™, 24 x 13mm, clear AUD130.00 /pk/2380 Available
I1633-C Laser Cryo-Clear™, 33 x 13mm, clear AUD131.00 /pk/1700 Available

LASER WETGRIP LABELS
Labels for wet and frozen surfaces, in 4 sizes to cater for most needs.
I17-22 is ideal for microscope slides
I17-24 is ideal for 0.5mL tubes
I17-33 is ideal for 1.5mL tubes
I17-38 is ideal for 1.5 - 2mL tubes

Features

• Labels adhere to wet, frost-covered and frozen surfaces
• Temperature range -40°C to 100°C
• Compatible with centrifuge rotors
• Resistant to chemicals and solvents
• Labels adhere to plastics, glass, metals and even paperboard boxes
• White, 20 sheets/pack
   

I17-22 Laser WetGrip labels, 22 x 22mm AUD105.00 /pk/2400 Available
I17-24 Laser WetGrip labels, 24 x 13mm AUD103.00 /pk/2380 Available
I17-33 Laser WetGrip labels, 33 x 13mm AUD106.00 /pk/1700 Available
I17-38 Laser WetGrip labels, 38 x 19mm AUD104.00 /pk/1500 Available

LASER WASH-OFF™ LABELS
Labels dissolve under running water in less than 30 seconds, leaving no adhesive residue.
Easy removal - Labels wash off in 1 rinse cycle at any water temperature
Environmentally safe - 100% biodegradable and FDA compliant
Autoclavable- Labels resist exposure to steam* at 121°C
Temperature resistant - Long term storage best between 0°C to 21°C.
Laser printable - Sheets work with standard laser printers

*A build-up of liquid water on the label surface will dissolve the material.

I18-067 Laser Wash-Off™ labels, 67 x 25mm AUD136.00 /pk/750 Available
I18-102 Laser Wash-Off™ labels, 102 x 25mm AUD135.00 /pk/500 Available

STICKY TABS for adhesion of SEM specimens
Very convenient self-adhesive tabs. May be applied to the surface of SEM specimen mounts, then with the backing peeled off, a sticky surface remains for mounting specimens. Sticky tabs provide a good, clean method for collecting samples in the field. Also useful for mounting photographs.
Dimensions: 21 x 11mm.

IA022 Sticky Tabs, SEM adhesive AUD6.00 /pack/216 Availability
IA0226 Sticky Tabs, SEM adhesive AUD49.00 /pk/2592 Available

CARBON TABS for adhesion of SEM specimens
May be used in place of conductive adhesives in certain applications. 30µm thick. 35µm conductive glue on one side and 40µm conductive glue on the other. Glue can be removed with ethyl acetate, ethanol or isopropanol. Temperature resistant up to 140^oC. Small impurities of Si, Sb, Fe, Mg and Na may be found.

IA023-9 Carbon tabs, 9mm AUD24.00 /pk/100 10% discount for 10 Availability
IA023 Carbon tabs, 12mm AUD29.00 /pk/100 10% discount for 10 Available
IA024 Carbon tabs, 25mm, SEM adhesive AUD42.00 /pk/54 10% discount for 10 Available

LIFT-N-PRESS for adhesion of SEM specimens
Adhesive tabs similar to the above sticky tabs. These offer a smoother background with a higher strength adhesive. These tabs leave a flat and complete circle of adhesive that is more suitable for holding small particles in place and are recommended for gunshot residue testing.
500 tabs/roll, 16 x 13mm.

IA030 Lift-N-Press, SEM adhesive AUD63.00 /roll Available

RADIOACTIVE WARNING DOTS adhesive paper
Supplied on a tape roll and are peeled off as needed. There are 1000 dots per roll. Each dot is with the radiation symbol on a yellow background. Colour coding complies with the OSHA regulations.

I130 Radiation warning dots, 6.35mm AUD53.00 /roll Availability

SMOOTHEST CARBON TABS
These carbon tabs eliminate problems with rough surfaces, insufficient tackiness and hardness with significantly lower contaminant levels under EDS.

IA029 Smoothest carbon tabs, 12mm AUD65.00 /pk/100 10% discount for 10 Available

CARBON TAPE For adhesion of SEM specimen
Conductive double-sided sticky carbon tape. For applications in SEM where conductivity is required or for X-ray uses. Solid surface so that samples will not sink. In SEMs BS or secondary mode, a uniform dark background results. 20m long and 0.16mm thick.

IA020 Double-sided carbon tape, 7mm wide AUD22.00 /roll/20m Available
IA0201 Double-sided carbon tape, SEM adhesive, 12mm wide AUD38.00 /roll/20m Available
IA0202 Double-sided carbon tape, SEM adhesive, 25mm wide AUD63.00 /roll/20m Available

DOUBLE-SIDED ADHESIVE TAPE
Now with an easy to remove backing strip. A simple and effective means for fastening many SEM samples or for mounting photographs. 12mm wide, in 33m rolls.

IA021 Double-sided tape, 12mm x 33m AUD8.00 /roll 10% discount for 10 Available
IA021-24 Double-sided tape, 24mm x 33m AUD15.00 /roll 10% discount for 10 Available

ROCKER TAPE, DOUBLE-SIDED ADHESIVE FILM
Double-sided adhesive film for laboratory container mounting.
Features

• Convenient - No more fumbling with clamps
• Versatile - Use with rockers, shakers, incubators or nutators
• Strong - Easily rock and roll up to 300rpm and beyond*
• Long lasting - Re-usable based on load capacity and vessel number
• Resistant - Keeps on rocking even in the prescence of most solvents and caustic agents

* RPM limits may vary based on load and vessel contact area. Test load recommended.

IA035-R RockerTape™, double-sided adhesive tape, 38mm x 6m AUD56.00 /roll Availability
IA035-S RockerTape™, double-sided adhesive sheets, 305 x 305mm AUD65.00 /pk/3 Available

SILVER POLYESTER TAPE
This tape has a silvery mirror surface but it is not metal, and it is not an electrical conductor. It may be used for masking slides, for making "boats" on glass knives and has decorative uses. Acrylic adhesive.
3M tape 9.5mm x 65.8m. Thickness 0.025mm.


IA025 Silver polyester tape, non-conductive, 9.5mm wide AUD40.00 /roll Available

METAL CONDUCTIVE TAPES single or double adhesive surface
3M® aluminium and copper tapes, core diameter is 76mm. These tapes are electrically conductive through a pressure sensitive acrylic adhesive. As the tape is applied, conductive particles in the adhesive bridge the gap between the backing and the substrate.

 
Foil thickness				0.051mm 
Total thickness				0.102mm 
Electrical resistance through adhesive	0.07 (ohms/cm²)

IA026 Aluminium tape, adhesive backing, 6.3mm x 16.4m AUD36.00 /roll Available
IA027 Copper tape, adhesive backing, 6.3mm x 16.4m AUD46.00 /roll Available
IA028 Copper tape, double-sided adhesive, 12.7mm wide x 16.4m AUD78.00 /roll Available

PARAFILM, M
Parafilm M is ideal for scientific laboratory work. It is a thermoplastic, sealing film. It holds moisture loss to a minimum and offers excellent protection for the contents of flasks, culture tubes and Petri dishes.
The sell unit of IA040 is now 2 rolls/38m.

IA040 Parafilm M, 50mm x 76m AUD39.00 /roll Available
IA041 Parafilm M, 100mm x 38m AUD38.00 /roll Availability

DENTAL WAX
For sealing boats to glass knives for microtomy and as a disposable hydrophobic surface for single drop staining.

There are approximately 25-30 sheets per 500g.
Each sheet is approximately 160 x 80 x 2mm (L x W x Thickness).
IL058 Dental wax AUD31.00 /500g Available