• Carbon and silver paint on page I2
• Carbon tabs on page I3
• Mount lifters on page T4

---

SEM MOUNTS
Lathe finished, anodised aluminium

PIN TYPE STANDARD	G040	3.1mm dia. pin. 12.6mm dia. slotted head. Fits Cambridge, Etec, Philips and others.
SLUG TYPE LARGE	G041	15 dia. x 10mm high. For ISI and JEOL.
PIN TYPE, LARGE	G043	25mm dia. slotted head (4 times the area of the standard mount). Fits same instruments as G040.
SLUG TYPE, GROOVED	G042	9.5 dia. x 9.5mm high. For JEOL.
	G045	12.5mm x 10mm. For JEOL.
HITACHI SCREW MOUNTS	G044	15 dia. x 6mm high with internal thread.
	G046	25 dia. x 5mm high with internal thread.
PLATFORM, LARGEST MOUNT	G047	31.7 dia x 6.5 high Cambridge, but fits over most mounts.
ANGLED SEM MOUNTS	G050	Angled 45°, Ø15 x H10mm x M4 threaded hole.
JEOL	G052	Ø 12.5mm x 5mm. For JEOL JSM 840.

G040 SEM mounts, pin type, Ø 12.6mm AUD31.00 /pk/100 10% discount for 5 Available
G041 SEM mounts, slug type, Ø 15mm x 10mm AUD43.00 /pk/100 10% discount for 5 Available
G042 SEM mounts, slug type, Ø 9.5mm x 9.5mm AUD38.00 /pk/100 10% discount for 5 Available
G043 SEM mounts, large pin type, Ø 25mm AUD18.00 /pk/10 10% discount for 10 Available
G044 SEM mounts, Hitachi screw, 15mm x 6mm AUD44.00 /pk/100 10% discount for 5 Available
G045 SEM mounts, slug type grooved, Ø 12.5mm x 10mm AUD49.00 /pk/100 10% discount for 5 Available
G046 SEM mounts, Hitachi screw, Ø 25mm AUD55.00 /pk/10 10% discount for 10 Available
G047 SEM mounts, Cambridge S-4 specimen, Ø 31.7mm AUD22.00 /pk/10 10% discount for 10 Available
G050 SEM mounts, angled 45°, Ø 15mm x H10mm x M4 AUD44.00 /pk/5 Available
G052 SEM mounts, JEOL JSM 840, Ø 12.5mm x 5mm AUD250.00 /pk/250 Availability

LARGE SPECIMEN MOUNTS FOR JEOL


G054-32 SEM mounts, JEOL, Ø 32 x 5mm AUD39.00 /pk/10 Available
G054-50 SEM mounts, JEOL, Ø 50 x 5mm AUD22.00 /pk/2 Available

ANGLED SPECIMEN MOUNTS FOR HITACHI

Large, angled Al mounts

G055 SEM mount, Hitachi, double 45°, Ø 25 x 4mm x M4 AUD17.00 Availability
G056 SEM mount, Hitachi, double 90°, Ø 25 x 16mm x M4 AUD17.00 Available

SEMClip™ SPECIMEN MOUNTS
The SEMClip™ SEM specimen mounts have been specifically designed to provide an easy, quick and clean way to mount any type of thin specimen on a specimen stub. The spring loaded clips can accommodate samples with a thickness up to 2mm. The samples are held down securely by a small spring-loaded clip which allows for easy change of samples. They do not require the use of adhesives thus avoiding waiting times and possible outgassing issues. The SEMClip™ mounts are available with 1, 2 and 3 clips and are ideal to hold silicon chips, paper, wire, threads, thin films, sheet metal, etc. The SEMClip™ mounts with multiple clips can be used to either hold larger samples or multiple smaller samples. The SEMClip™ mounts are also ideal to hold the silicon chip specimen support mounts G540.
Pin stub versions of SEMClip™ are available in diameters from 18 to 50mm and can be used with all SEMs using pin stubs: FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, CamScan and Tescan. The slug mount versions for JEOL SEMs are available in 25 and 32mm diameter. The SEMClip™ screw mount for Hitachi SEMs (with M4 thread) are available in 15, 25 and 32mm - ask for sizes not listed below.

G041-1C SEMClip™ slug mount, 15mm, 1 clip - discontinued /ea
G043-2C SEMClip™ pin mount, 25mm, 2 clips AUD46.00 /ea Available
G044-1C SEMClip™ Hitachi screw mount, 15mm, 1 clip AUD30.00 /ea Availability
G048-1C SEMClip™ pin mount, 18mm, 1clip AUD30.00 /ea Available
G049-1C SEMClip™ slug mount, 25mm 45°, 1 clip AUD41.00 /ea Availability

SEMClip™ GEOLOGICAL THIN SECTION HOLDERS FOR SEM
For FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, CamScan and Tescan SEMs.
These holders can accommodate 1, 2 or 4 standard geological thin sections or slides of 47 x 27mm. Clips are provided for secure holding. Tweezer inserts enable easy loading. Material: aluminium with copper clips and brass screws. Pin length 9.5mm.
The variable size geological thin section holder accommodates either standard thin sections of 47 x 27mm or smaller or larger thin sections. Smallest size would be 40 x 20mm. Two clips are provided for secure holding. Tweezers insert enables easy loading.

Overall dimensions
G036-1HS: 55 x 30 x 8mm
G036-2HD: 55 x 58 x 8mm
G036-3HQ: 107 x 58 x 8mm
G036-4HV: 51 x 32 x 8mm

G036-1S SEMClip™ single 47 x 27mm section holder, 2 clips AUD288.00 Availability
G036-2D SEMClip™ double 47 x 27mm section holder, 4 clips AUD341.00 Availability
G036-3Q SEMClip™ quadruple 47 x 27mm section holder, 8 clips AUD358.00 Availability
G036-4V SEMClip™ variable size section holder, 2 clips AUD288.00 Availability

SEMCLIP™ GEOLOGICAL THIN SECTION HOLDERS FOR HITACHI SEMs
These geological thin section holders can be used on all Hitachi SEMs, FESEMs and FIB systems with an M4 stage adapter. All the Hitachi holders  have the widely used female M4 thread. 
They can accommodate 1, 2 or 4 standard geological thin sections or slides of 47 x 27mm. Clips are provided for secure holding. Tweezer inserts enable easy loading. Material: aluminium with copper clips and brass screws.
The variable size geological thin section holder accommodates either standard thin sections of 47 x 27mm or smaller or larger thin sections. Smallest size would be 40 x 20mm. Two clips are provided for secure holding. Tweezers insert enables easy loading.

Overall dimensions
G036-1HS: 55 x 30 x 8mm
G036-2HD: 55 x 58 x 8mm
G036-3HQ: 107 x 58 x 8mm
G036-4HV: 51 x 32 x 8mm

G036-1HS SEMClip™ single 47 x 27mm section holder for Hitachi, 2 clips AUD277.00 Availability
G036-2HD SEMClip™ double 47 x 27mm section holder for Hitachi, 4 clips AUD315.00 Availability
G036-3HQ SEMClip™ quadruple 47 x 27mm section holder for Hitachi, 8 clips AUD348.00 Availability
G036-4HV SEMClip™ variable size section holder for Hitachi, 2 clips AUD277.00 Availability

TEM GRID HOLDER ON PIN
This TEM grid holder holds up to 4 TEM grids. It enables imaging and analysing specimens on TEM grids in the SEM. For EDS applications it is beneficial to place thin films on a TEM grid or small particles on a TEM grid with a support film. This can significantly reduce background in the EDS spectrum and increase detection limits of the EDS detector. Opening angle on the holes in the top and base are 120° to reduce electron scattering and improve X-ray collection. Overall diameter is 18mm, standard 3.2mm pin with a 15mm long pin. The longer pin allows for a larger distance from the SEM stage pin holder and therefore greatly reduces electron and X-ray scattering contribution for the SEM stage. TEM grid locations are numbered. Material: vacuum grade aluminium with brass screw.

G032-04 TEM grid holder for 4 grids, pin AUD201.00 Availability

SEM PIN MOUNTS WITH ENGRAVED DIVISIONS
SEM mounts for all standard SEMs, with engraved and numbered divisions to accommodate multiple smaller samples. The clearly numbered divisions also allow for easy locating of the mounted samples. Mounting multiple samples inside the clearly labelled divisions is a space saving alternative to mounting single samples on single mounts. Quality machined, smooth surface.
Pin stub versions of the engraved mounts can be used with all SEMs using pin stubs: FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan.
Engraved cylinder mounts for Hitachi and Jeol are also available.

Pin dimensions: Ø 3.2mm, length 9mm.

G039-18 SEM pin mounts with 3 engraved divisions, Ø 18mm AUD22.00 /pk/2 Available
G039-25 SEM pin mounts with 9 engraved divisions, Ø 25mm AUD22.00 /pk/2 Availability

SEM PIN MOUNT, LOW PROFILE 45°/90°
Low profile 45° / 90° SEM mount Ø12.7mm, pin leg fits into Cambridge, Leica, ZEISS, LEO, FEI, Philips, CamScan, Tescan, ETEC and Amray SEM's.
Aluminium, grooved edge.

Pin dimensions: Ø 3.2mm, length 9.5mm.

G038-12 SEM pin mounts, low profile 45°/90°, Ø 12.7mm AUD14.00 /pk/2 Availability

COMPACT VARIABLE TILT PIN MOUNT
This compact variable tilt specimen mount allows for easy mounting and tilting of small samples from 0° - 90° and SEM investigation with small working distances. Markings for 30°, 45°, 70° and 90°. Table size is 11 x 11mm. Overall size is 14 x 14 x12.7mm. Made of aluminium with stainless steel screw. Allen key included.

G035 Compact, variable tilt pin mount AUD91.00 Availability

MULTI-PIN SPECIMEN MOUNT, 4 POSITIONS
Accommodates up to four standard 12.7mm pin stubs, with 3.2mm diameter pin. Material: machined aluminium with stainless steel Allen set screws. Allen key included. Holder size is Ø31.8 x 11.25mm. 
Mounts with 6, 8, 12, 29 and 49 positions are available - ask.

G034 Multi-pin specimen mount, 4 positions AUD79.00 Availability

MULTI-PURPOSE SPECIMEN MOUNT
Compatible with 3.2mm pin stub holder and bulk or irregularly shaped specimens up to 25mm. Accepts up to 25mm diameter metallurgical mounts. Material: machined aluminium with stainless steel Allen set screws. Allen key included. Holder size is Ø31.5 x 11mm.

G033 Multi-purpose specimen mount AUD89.00 Availability

SEM PIN MOUNT ADAPTER FOR HITACHI, ISI, ABT, TOPCON SEMs
Pin mount adapter, 15 x 10mm H with M4 thread on one side. Enables the use of standard pin mounts with 3.2mm pin on Hitachi or ISI/ABT/Topcon SEMs. Made from aluminium with stainless set screw. Allen key included.
Note: when the adapter is mounted on the Hitachi stage, 6mm height is left; any mounts with a pin longer than 6mm will stick out of the adapter.

G037-H SEM pin mount adapter for Hitachi M4, Ø 15mm AUD41.00 Available

SEM PIN MOUNT ADAPTER FOR JEOL CYLINDER MOUNT
Pin mount adapter, 12.2 x 10mm H for JEOL. Enables the use of standard pin mount with 3.2mm pin on JEOL SEM. Made from aluminium with stainless set screw. Allen key included.
Other diameters available - ask.

G037-J12 SEM pin mount adapter for Jeol 12.2mm cylinder mount AUD46.00 Availability

CARBON PLANCHETS
Carbon (graphite) planchets are ideal substrates for X-ray analysis and backscattered electron imaging in a SEM or electron microprobe. The spectroscopically pure carbon provides an excellent conductive, low emission X-ray background free of any characteristic X-ray peaks except carbon. Carbon planchets are favored over the non-conductive diamond planchets (charging will have negative effects on the analytical results and can distort X-ray mapping and imaging).
The carbon planchets can be cleaned and used again.
Impurities equal to or less than 2ppm (single element 1ppm or less). Fine ground finish on one side; 0.80µm. All planchets are 1.6mm thick.
Other sizes are available to fit all styles of SEM pin and cylinder mounts varying from 10 to 32mm diameter - ask

G053-10 Carbon planchets, Ø 10mm AUD25.00 /pk/10 Available
G053-18 Carbon planchets, Ø 18mm AUD26.00 /pk/10 Available

SEM PIN MOUNT STAND, 40 MOUNTS
This practical pin mount stand, made out of clean solid aluminium, is useful for storage or specimen preparation of large numbers of pin mounts. The pin mount stand can hold 40 standard ø12.7mm pin mounts or 12 x ø25mm mounts. It is compatible with all types of SEM pin mounts up to 100mm diameter and with the pin mount type SEM specimen holders.
Six of these pin mount stands fit on a shelf in a 300 x 300 x 300mm desiccator, creating a storage capacity of 240 standard pin mounts per shelf. Also very practical for storing pin mount type SEM specimen holders.
The stand can also be used for supporting pin mounts and pin type SEM specimen holders when mounting specimens. Ideal when preparing large numbers of specimens. One corner of the pin mount stand has a notch to aid as a locator.
Overall size is 137 x 89 x 16mm.

G064 SEM pin mount stand, 40 mounts AUD43.00 Available

SEM-STOR PAPER BOX STORAGE, 8 MOUNTS
Inexpensive storage for SEM mounts. Fold-up insert which accepts 8 G040 specimen mounts.Shipped flat. 70mm long x 38mm wide x 35mm high.

G061 SEM specimen paper storage boxes, 8 mounts AUD18.00 /pk/10 10% discount for 10 Available

SEM SPECIMEN STORAGE BOX, 4 MOUNTS
Plastic box with pin stub specimen holder. For ø12.7mm SEM pin mounts with ø3.2mm pins. Used for FEI/Philips, ZEISS/LEO/Leica, Cambridge, CamScan, Tescan, Amray and Etec SEMs.

G062 SEM specimen storage box, 4 mounts AUD12.00 /pk/2 10% discount for 10 Available

SEM SPECIMEN STORAGE BOX, 12 MOUNTS
For storing or shipping specimens on SEM mounts. Reversible insert holds up to 12 mounts, either pin types G040 and G043, or slug types G041 and G042.

G051 SEM specimen storage box, 12 mounts AUD9.00 15% discount for 20 Available

STORAGE CABINET FOR SEM PIN MOUNTS
This robust plastic 5 drawer cabinet stores up to 1300 standard 12.7mm pin mounts in 5 drawers. Each drawer features a removable clear polypropylene box with hinged lid and latches, which can be taken to the SEM or preparation station for specimen transfer.

The pin mounts are held in a closed cell rubber foam insert. Each box in the drawer holds 260 standard 12.7mm pin mounts. The lid on the box minimises moisture and dust affecting the contents. A storage map is provided with each drawer/box. The pin mount storage cabinet can also be used to store larger diameter pin mounts (up to 100mm or for pin type specimen holders with a maximum height of 32mm.

The cabinet is made of sturdy and non-corrosive high density polyethylene, the drawers and clear boxes are made from impact polypropylene.
The cabinets are stackable with interlocking grooves.
Outside dimensions of the cabinet are W394 x D368 x H406mm.
The internal dimension of the boxes in the drawers are 333 x 225mm with a maximum specimen height of 32mm.

The foam insert and the clear plastic box with foam insert can also be ordered separately. The foam insert can be used without the box, to store specimens in desiccators.

G063 Storage cabinet for SEM pin mounts AUD698.00 Availability
G063-B Storage box for 260 SEM pin mounts, PP AUD119.00 Available
G063-F Replacement foam insert for storage box AUD61.00 Available

FORENSIC FIELD SAMPLER
Collect gunshot residue and other materials with certainty of non-contamination. These mounts are manufactured in a special aluminium alloy containing only trace amounts of the elements that are indicative in gunshot analyses. These mounts contain less than these indicated impurities: 0.01% antimony; 0.0005% barium; 0.002% lead; 0.28% copper.
The high purity pin type mounts come enclosed within a protective clear holder. For use affix carbon conductive tabs. Contains one hundred sample kits.

G040GS Forensic field sampler, aluminium alloy mount AUD259.00 /pk/100 Available

SINGLE MOUNT STORAGE/MAILER TUBE for SEM specimen mounts
Suited to pin type mounts, they are protected and held securely in the base (cap) of the tube. See also Forensic Field Sampler G040GS.
Note: The SEM mount is shown for illustration and is not included with the storage tube.

G058 SEM specimen storage tube, single mount AUD17.00 /pk/10 10% discount for 10 Availability

SEM FINDER GRIDS
10mm diameter x 50µm thick metal foil may be mounted on SEM mounts and used to field index small specimens. Available in gold, copper & nickel.

G030AU SEM finder grids, gold AUD161.00 /vial/5 Availability
G030CU SEM finder grids, copper AUD82.00 /vial/10 Availability
G030NI SEM finder grids, nickel AUD92.00 /vial/10 Availability