• Histo slide heater and section flotation baths on page U9
• Hotplates up to 70°C; Slide warmers for histology on page U9
• Stirrer-Hotplates; Magnetic Stirrers E9. Also small Hanna magnetic stirrers on E3
• Digital PID control unit & solid state heat controller
• Shipping dimensions and weights of hotplates, water/ steam baths

Shipping of ovens, incubators and hotplates
Our quotations include shipping cost of these items within Australia. For overseas orders please ask for a price including freight.
Shipping dimensions and weights of incubators, ovens, hotplates, waterbaths and steambaths.

HOTPLATES
Our hotplates are suitable for all routine laboratory applications. They are rugged, durable and are available in a range of sizes and types, designed to deliver uniform temperature over the whole top surface. The bodies are of mild steel coated with a white, high acid-resistant polyurethane enamel and supported by rubber feet.

Units with cast iron top plates are controlled by energy regulators, maximum 500°C. Aluminium top units are thermostatically controlled up to 300°C; Teflon "Silverstone" coated up to 280°C. Solid state instruments can be fitted for finer temperature control. Stainless steel surrounds are available for sand bath heating.

A separate controller is supplied for the larger model 206 cast iron top hotplate or for any other model when used in extremely corrosive environments. Special acid resistant element leads and 316 stainless steel are used on the heavy acid range of hotplates.

SEM heat controllers can be used on any heating apparatus.

• EHC1 to 10 amps at 240V.
• EHC15 TO 15 amps at 240V.

Sizes range from 130mm diameter round to 610 x 500mm rectangular. All require 220/240 volts.

Hotplate tops are made from smooth or rough aluminium, optionally with PTFE coating, or from cast iron.

• A smooth hotplate is preferable for curing mounting media, smoothing wax and resin sections, heat staining and drying silica gel.
• A rough hotplate reduces boiling bounce.

Hotplates are custom built and special purpose models, for instance in explosion prone environments, or for drying, are available.
Some models can be made to withstand extremely corrosive environments. These are fitted with the temperature controller in a separate housing and a more acid-resistant element.
For critical analytical work, hotplates can be supplied completely coated with PTFE.

All Aluminium/ Teflon hotplates are available in a low-temperature version. These are better controlled in the lower temperature range and cannot reach the highest temperatures, thus avoiding some hazardous situations. These plates carry the suffix 'L' in addition to the A or T in the catalogue number e.g. E204AL. They may be ordered specifying the critical temperature range, prices are the same as the equivalent normal temperature range hotplates.

These are quality Australian-made hotplates. Usual delivery period is four weeks, although small hotplates may be ex-stock.

Variations available using E202 as an example:
E202 - cast iron
E202A - aluminium
E202T - PTFE coated aluminium
E202AL - aluminium, low temperature

ROUND HOTPLATES

Model	Sizemm	Top plate	~ Max. temp.	Power rating	Phase	Control
E202	Ø 200	Cast iron	480oC	1200W	1	Energy regulator
E203A	Ø 130	Aluminium	300oC	400W	1	Energy regulator
E203T	Ø 130	Aluminium/PTFE	280oC	400W	1	Thermostat

E202 Hotplate, cast iron, Ø 200mm AUD283.00 Availability
E203A Hotplate, aluminium, Ø 130mm AUD233.00 Availability
E203T Hotplate, PTFE coated aluminium, Ø 130mm AUD295.00 Availability

RECTANGULAR AND SQUARE HOTPLATES

Model	Sizemm	Top plate	~ Max. temp.	Power rating	Phase	Control
E204	230 x 230	Cast iron	400oC	1200W	1	Energy regulator
E204A	230 x 230	Aluminium	300oC	750W	1	Thermostat
E204T	230 x 230	Aluminium/PTFE	280oC	750W	1	Thermostat
E201	460 x 260	Cast iron	375oC	2400W	1	Energy regulator
E201A	460 x 260	Aluminium	300oC	1500W	1	Thermostat
E201T	460 x 260	Aluminium/PTFE	280oC	1500W	1	Thermostat
E207	610 x 300	Cast iron	385oC	3600W	1	Energy regulator
E207A	610 x 300	Aluminium	300oC	2400W	1	Thermostat
E207T	610 x 300	Aluminium/ PTFE	280oC	2400W	1	Thermostat
E206	610 x 500	Cast iron	450oC	7200W	3	Energy regulator
E206A	610 x 500	Aluminium	300oC	4500W	3	Thermostat
E206T	610 x 500	Aluminium/ PTFE	280oC	4500W	3	Thermostat
E208	200 x 200	Cast iron	450oC	1200W	1	Energy regulator
E208A	200 x 200	Aluminium	300oC	1200W	1	Thermostat
E208T	200 x 200	Aluminium/ PTFE	280oC	1200W	1	Thermostat
E209	300 x 300	Cast iron	400oC	2400W	1	Energy regulator
E209A	300 x 300	Aluminium	300oC	1200W	1	Thermostat
E209T	300 x 300	Aluminium/ PTFE	280oC	1200W	1	Thermostat
E210	460 x 300	Cast iron	350oC	2400W	1	Energy regulator
E210A	460 x 300	Aluminium	300oC	1500W	1	Thermostat
E210T	460 x 300	Aluminium/ PTFE	280oC	1500W	1	Thermostat

E201 Hotplate, cast iron, 460 x 260mm AUD499.00 Availability
E201A Hotplate, aluminium, 460 x 260mm AUD536.00 Availability
E201T Hotplate, PTFE coated aluminium, 460 x 260mm AUD628.00 Availability
E204 Hotplate, cast iron, 230 x 230mm AUD308.00 Availability
E204A Hotplate, aluminium, 230 x 230mm AUD337.00 Availability
E204T Hotplate, PTFE coated aluminium, 230 x 230mm AUD403.00 Availability
E206 Hotplate, cast iron, 610 x 500mm ask Availability
E206A Hotplate, aluminium, 610 x 500mm ask Availability
E206T Hotplate, PTFE coated aluminium, 610 x 500mm ask Availability
E207 Hotplate, cast iron, 610 x 300mm AUD786.00 Availability
E207A Hotplate, aluminium, 610 x 300mm AUD790.00 Availability
E207T Hotplate, PTFE coated aluminium, 610 x 300mm AUD923.00 Availability
E208 Hotplate, cast iron, 200 x 200mm AUD304.00 Availability
E208A Hotplate, aluminium, 200 x 200mm AUD333.00 Availability
E208T Hotplate, PTFE coated aluminium, 200 x 200mm AUD378.00 Availability
E209 Hotplate, cast iron, 300 x 300mm AUD399.00 Availability
E209A Hotplate, aluminium, 300 x 300mm AUD432.00 Availability
E209T Hotplate, PTFE coated aluminium, 300 x 300mm AUD532.00 Availability
E210 Hotplate, cast iron, 460 x 300mm AUD570.00 Availability
E210A Hotplate, aluminium, 460 x 300mm AUD590.00 Availability
E210T Hotplate, PTFE coated aluminium, 460 x 300mm AUD694.00 Availability

HOTPLATES FOR CORROSIVE ENVIRONMENTS
Hotplates from the heavy acid range are suitable for extremely corrosive environments. This range covers a variety of sizes in cast iron. Aluminium is available on request.

The hotplate bodies are constructed entirely from heavy gauge 316 stainless steel, and element connections are fully sealed.

Single phase hotplates are supplied with a 10 amp or 15 amp heat control box of cast aluminium construction. This can be free standing on rubber supports or fixed to a wall via mounting lugs.

Three phase hotplates are supplied with a robust switching unit housed in a powder coated heavy gauge steel box and a single phase cord to power the energy regulator and three pole relay.

Teflon coated aluminium or austenitic iron hotplates are available in most sizes, and digital PID control with removable temperature probe is an option on any hotplate.

*Specials made to customers requirements.

Heavy acid range hotplates

Model No.	Size (mm)	Top plate	~ Max temp.	Power rating	Phase	Controller
E202HA	Ø 200	Cast iron	480°C	1200W	1	HC1
E204HA	230 x 230	Cast iron	400°C	1200W	1	HC1
E201HA	460 x 260	Cast iron	375°C	2400W	1	HC1
E207HA	610 x 300	Cast iron	385°C	3600W	1	HC15
E206HA	610 x 500	Cast iron	450°C	7200W	3	206SWU
E208HA	200 x 200	Cast iron	450°C	1200W	1	HC1
E209HA	300 x 300	Cast iron	400°C	2400W	1	HC1
E210HA	460 x 300	Cast iron	350°C	2400W	1	HC1

*** No 3 Phase cable supplied with 206 hotplate or switching unit.

Control units

Mode	Power rating (max.)	Phase	Current (max.)
EHC1	2400W	1	10 Amp
EHC15	3600W	1	15 Amp
E206SWU	3 x 2400W	3	3 x 10 Amp

E202HA Hotplate for acid environment, Ø 200mm AUD445.00 Availability
E201HA Hotplate for acid environment, 460 x 260mm AUD686.00 Availability
E204HA Hotplate for acid environment, 230 x 230mm AUD466.00 Availability
E206HA Hotplate for acid environment, 610 x 500mm ask Availability
E207HA Hotplate for acid environment, 610 x 300mm AUD973.00 Availability
E208HA Hotplate for acid environment, 200 x 200mm AUD462.00 Availability
E209HA Hotplate for acid environment, 300 x 300mm AUD570.00 Availability
E210HA Hotplate for acid environment, 460 x 300mm AUD715.00 Availability

STAINLESS STEEL HOT PLATE
Stainless steel hot plate surface is ideal for all general laboratory applications. Hot plate heats from 100°C-50°C fast and accurately. Turn dial temperature control. Best used for baking, drying, distilling samples and other related temperature experiments.

Temperature range	100°C - 250°C
Power requirement	300W
Heating surface	198 x 152mm
Overall size	355 x 216 x 102mm

E20DB-1 Hotplate, SS, 200 x 150mm AUD434.00 Availability

SAND BATHS
All rectangular and square S.E.M. hotplates can be converted to sand baths by the addition of a Sand Bath Surround. These are made from 316 grade stainless steel and simply slide on to the hotplate. Clamping screws secure the surround and eliminate any gaps for sand to escape.
Wall heights are 30, 50 or 75mm.
Optional flat lids available for any size Sand Bath Surround. Ask for price.

DRY BATHS, DIGITAL
The Benchmark dry baths feature digital control of temperature and time, eliminating the need for an external thermometer or timer. Available in three configurations, the digital dry baths offer capacity for up to four blocks (96 x 1.5/2.0mL microtubes).

Features

• Digital accuracy and convenience
• Built-in user recalibration function to guarantee long term temperature accuracy
• Single, double and four block capacity
• High grade aluminium blocks for a wide variety of tube sizes
• Block cavities are precision machined to match the conical size and shape of the tubes
• Wide variety of block options - Blocks available for 0.5, 1.5, 2.0, 15 and 50mL tubes
• Block lifter with insulated handle for quick exchange of hot blocks

Specifications
Temperature range	Amb. +5 to 150°C
Temperature resolution	0.1°C
Temperature accuracy	+/-0.2°
Temperature increments	0.1°C
Temperature uniformity	+/-0.2°C
Timer	1 to 999 minutes
Dimensions (WxDxH)
Single position	200 x 230 x 80mm
Two position	220 x 270 x 80mm
Four position	220 x 355 x 80mm
Block dimensions (WxDxH)	76 x 95 x 50 or 83mm
Chamber	Stainless steel
Operating temperature range	+4°C to +65°C
Warranty	2 Years
Electrical	230V AC, 50Hz

EB1001 Digital dry bath, 1 block AUD507.00 Availability
EB1002 Digital dry bath, 2 blocks AUD612.00 Availability
EB1004 Digital dry bath, 4 blocks AUD907.00 Availability
EB1004-B1 Dry bath block for 24 x 0.5mL centrifuge tubes AUD152.00 Availability
EB1004-B2 Dry bath block for 24 x 1.5/2.0mL centrifuge tubes AUD152.00 Availability
EB1004-B3 Dry bath block for 12 x 15mL centrifuge tubes AUD152.00 Availability
EB1004-B4 Dry bath block for 5 x 50mL centrifuge tubes AUD152.00 Availability
EB1004-B5 Dry bath block for 20 x 10mm test tubes or 20 x 2.0mL tubes AUD152.00 Availability
EB1004-B6 Dry bath block for 20 x 13mm test tubes or 20 x 5/7mL tubes AUD152.00 Availability
EB1004-B7 Dry bath block for 12 x 15/16mm test tubes or 12 x 10mL tubes AUD152.00 Availability

MyBlock™ MINI DRY BATH
MyBlock™ Mini dry bath is a compact instrument which fits almost anywhere and can also be used in cars, boats or wherever a 12 volt power source is available.
Six block configurations cater for a variety of tube sizes, ranging from 0.2 to 50mL. EB100-B4 holes have been shaped to the profile of a standard 1.5mL conical centrifuge tube. The others have straight sides. A convenient block lifter is included, allowing blocks to be removed from the instrument before they have cooled.

The simple touch pad control with large, backlit, digital display is designed for 'set and walk away' temperature selection, ambient + 5°C to 80°C. Each unit includes a clear plastic cover, providing enhanced temperature uniformity and ramping time.

Features

• Compact, fits in the palm of a hand
• Exchangeable blocks, for tube sizes 0.2 to 50mL - available separately
• Clear cover ensures temperature uniformity
• Digital temperature control
• High accuracy
• Portable (optional 12V car adapter)

Specifications
Temperature range	Ambient +5 to 80°C
Temperature accuracy	+/- 0.5°C
Temperature increments	0.1°C
Temperature uniformity	+/- 0.2°C
Block construction	High grade aluminium
Dimensions	112 x 150 x 100mm
Weight	1.4kg
Electrical	240V 50Hz

EB200 MyBlock™ mini dry bath AUD342.00 Availability
EB100-B1 Mini dry bath block for 40 x 0.2mL tubes or 5 PCR strips AUD112.00 Availability
EB100-B2 Mini dry bath block for 24 x 0.5mL centrifuge tubes AUD107.00 Availability
EB100-B3 Mini dry bath block for 15 x 1.5mL centrifuge tubes AUD107.00 Availability
EB100-B4 Mini dry bath block for 15 x 1.5/2.0mL centrifuge tubes (tapered) AUD116.00 Availability
EB100-B5 Mini dry bath block for 4 x 15mL centrifuge tubes AUD132.00 Availability
EB100-B6 Mini dry bath block for 2 x 50mL centrifuge tubes AUD132.00 Availability
EB100-PA12 Power adapter for vehicles, 12V AUD65.00 Availability

MYBLOCK™ HL MINI DRY BATH WITH HEATED LID
The new MyBlock™ HL is the first and only mini heat block featuring a heated lid for protecting samples against unwanted condensation and evaporation. Both the block and lid temperature can be selected independently in increments of 0.1°C, making this MyBlock the ideal choice for the most temperature sensitive applications, including immunoassays, LAMP assays, enzyme reactions & other temperature hyper-sensitive procedures.

Features

• Heated lid prevents evaporation & condensation
• Compact, fits in the palm of your hand
• Independant temperature control of lid & block
• Exchangeable blocks for 0.2 to 0.5ml tubes
• Room temperature to 37°C in just 2 minutes

Specifications

Temperature range	Ambient +5 to 100°C
Temperature accuracy	+/- 0.3°C
Temperature increments	0.1°C
Temperature uniformity	+/- 0.2°C
Dimensions (W x D x H)	105 x 150 x 115mm
Block dimensions	47 x 71 x 32mm
Weight	1kg
Electrical	Universal Voltage, 240V, 50, 50W
Warranty	2 years

Accessories

EBSH100-02	Block, 40 x 0.2ml or 5 PCR strips
EBSH100-05	Block, 24 x 0.5mL
EBSH100-15HL	Block, 15 x 1.5mL

EB200HL MyBlock™ HL mini dry bath with heated lid AUD614.00 Availability

THERMAL CYCLER WITH MULTIFORMAT BLOCK
Summary: This instrument provides accurate temperature control during treatment protocols where specimens are required to be at varying times at different temperatures, anywhere between freezing point and 100°C. Times at particular temperatures, including ramping times, are fully controllable and programs may be named and stored using a large screen and an easily programmable, brilliant Wizard. The lid is heated to avoid condensation at high temperatures and for added uniformity. Model 9639 accommodates 0.2 or 0.5mL tubes, well (culture) plates or, with an optional adapter, slides.

Benchmark's TC9639 Thermal Cycler provides consistent, reliable results for laboratories with medium to high throughput. From its large, touch-screen user interface to its unique, multi-format block, this cycler is loaded with features. The program wizard and 10 pre-installed programs make it easier than ever to get up and running.

A large, full colour touch screen serves as the operations centre where all functions are accessed. From the "Home" screen, simply touch an icon to view the last run program, enter the program library, or use the program wizard to quickly enter a protocol. In addition, icons for favorite programs can be added for faster access.

The program wizard guides users through quickly setting up a protocol in a single screen. Once entered, programs are shown graphically, and can be edited by simply touching the step that requires modification. Time and temperature increments can be built into programs as well as slower ramp rates. Storage capabilities are unlimited; programs can be stored in public folders, private (password protected) folders or on a flash drive. The full virtual keyboard allows for alphanumeric naming of programs and folders.

The fully adjustable, heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35°, lid heating is automatically turned off. Heating and cooling of the block are precisely and accurately controlled within exceptionally tight tolerances by a proprietary algorithm that simulates sample temperature.

With the multi-format block, there is no need for the expense of multiple interchangeable blocks. The TC 9639 has the flexibility to accept 96 x 0.2ml tubes, a 96 well plate or 39 x 0.5ml tubes all in the same sample block. An in-situ adapter is available for use with slides. Additionally, the unit may be purchased with a 384 well sample block.

Features

• Intuitive touch screen control
• Program Wizard - quick, easy & foolproof
• Unique multi-format block
  • 0.2ml tubes or strips (96)
  • 0.5ml tubes (39)
  • 96 well plate (1)

Capacity
9639 Block (included)	96 x 0.2ml tubes / strips or 1 PCR plate or 39 x 0.5ml
384 Well Block	1 x 384 well plate
In-Situ Adapter	4 slides (for use with 9639 block)
Temp. Control Range	0° to 100°C
Temp. Control	Simulated sample or block
Accuracy/Uniformity	± 0.2°C / ± 0.2°C
Ramp Rate	4°C / Sec. (maximum)
Lid Temp	30°C to 112°C, user adjustable
Program Memory	Unlimited with flash drive
Increments/Decrements	Yes, both time and temperature
Multiuser Login	Yes, with password protection
Power Failure Restart	Yes
Power Supply	Universal, 75 to 275V, 50 to 60Hz
Communication	USB, LAN and RS232
Dimensions	260 x 360 x 250mm
Weight	7.3kg
Warranty	2 years

ETC9639-96 Thermal cycler with multiformat block ask Availability
ETC9639-374 Thermal cycler with 384 well block ask Availability
ETC9639-AIS In-situ adapter for use with ETC9639-96 AUD475.00 Availability

MYBATH™ WATER BATH
This compact 4 litre water bath features easy to use controls that allow the user to digitally select and monitor temperature. Its hinged lid provides a secure, covered environment and can be flipped open (to the rear) or completely and instantly removed at the user's option. The MyBath™ 4L is also the only water bath that comes with test tube racks for 50ml, 15ml and 1.5/2.0ml tubes, making it complete and ready to use. Designed with the molecular biology lab in mind, the MyBath™ 4 litre is the complete personal water bath.

Features

• Includes tube racks for 1.5/2.0ml, 15ml & 50ml tubes
• Mini sized, less than 200mm wide
• Hinged lid is also removable
• Digital control (to 100°C) at a analogue price
• Quik-CAL™ in-lab user calibration function
• Digital accuracy and convenience

Specifications
Temperature range	Ambient +5 to 100°C
Capacity	4L
Temperature accuracy	+/- 0.2°C
Temperature increments	0.1°C
Temperature uniformity	+/- 0.2°C
Dimensions	195 x 350 x 230mm
Chamber dimensions	135 x 240 x 140mm
Weight	6.5kg
Electrical	240V 50Hz, 400W
Warranty	2 years

Optional Accessories

• Tube rack from 40 x 0.5mL tubes

EBB2000 MyBath™ 4L water bath, digital AUD986.00 Availability

DIGITAL WATER BATH
This general purpose digital water bath has a temperature regulated sensor and is essential for drying, condensing, distilling, soaking chemical agent, drugs and biological products extensively. It can also be used for heating and other temperature related experiments.

Features

• Stainless steel corrosion-resistant interior
• Precise/accurate temperature control, digital display, and auto temperature control.
• Two models to fill various needs.

Cat. No.	EHH-4	EHH-6
No. of wells	4	6
Depth of wells	120mm	110mm
Heating power	1000W	1500W
Cartridge fuse	8A	10A
Temperature range	Room temperature - 100°C	Room temperature - 100°C
Stirring speed	0 - 1000rpm	0 - 1000rpm
Diameter of wells	Ring system allows the wells to open up to the following sizes: (38mm, 57mm, 76mm, 99mm, 122mm)	Ring system allows the wells to open up to the following sizes: (38mm, 57mm, 76mm, 99mm, 122mm)
Usage environment	Environment temperature: 16 - 40°C Relevant temperature: ≤80°C	Environment temperature: 16 - 40°C Relevant temperature: ≤80°C
Temperature control precision	≤±0.5°C	≤±0.5°C

EHH-6 is available - ask.

EHH-4 Digital water bath, 4 wells AUD544.00 Availability

RECIPROCATING WATER BATH SHAKER
Ideal for a wide range of applications in biology and chemistry. The bath may be used as a heated shaking bath, just for shaking at ambient temperature and as a static water bath.

Features

• Stainless steel interior
• Precise temperature controls, LED readout with 0.1° increments
• Heating indicator light
• Large shaking range
• Adjustable shaking rate
• Powerful spring stands to support various flask sizes
• Supplied with cover and built-in thermometer

Temperature range; accuracy	Ambient to 100°C; ±0.5°C
Total bottle capacity	Flask: 250mL x 12; 500mL x 7; 1000mL x 4
Timing range	0-120mins (or continuous operation)
Shaking rate	0-300 strokes/min
Shaking range	200mm in a circular motion
Heating power	1800W
Chamber size	390 x 490 x 160mm
Overall L x W x H	700 x 550 x 490mm

EWBS1 Water bath shaker ask Availability

STEAM BATHS
All stainless steel construction with welded joints. Fitted with constant water level device. Internal depth 90mm. The heating element has an overheat protection device within it.
A removable stainless steel cover has the appropriate number and size of holes, each fitted with a set of four rings.
The unit has a simmerstat to regulate heating, a two metre flex and three pin plug top.

Cat. Number*	Overall Dimensions	W	Hole Size
ESB6-8	334L x 220W x 185H	1500	80mm
ESB6-10	430L x 295W x 185H	1500	100mm
ESB12-8	420L x 320W x 185H	2400	80mm
ESB12-10	540L x 430W x 185H	2400	100mm
ESB2-8	250L x 160W x 185H	1500	80mm
ESB2-10	295L x 160W x 185H	1500	100mm

INLINE STEAM BATHS
Inline steam baths are available in the following sizes:

ESB6-8IL	829L x 162W x 185H	1500	80mm
ESB4-8IL	563L x 162W x 185H	1500	80mm
ESB6-10IL	829L x 162W x 185H	1500	100mm
ESB4-10IL	563L x 162W x 185H	1500	100mm

*Catalogue number explanation: SB6-8 = Steam bath with 6 holes, 8cm each.
ESB6-8 Steam bath, 334 x 220 x 185mm, 6 x 80mm holes
ESB6-10 Steam bath, 430 x 295 x 185mm, 6 x 100mm holes
ESB12-8 Steam bath, 420 x 320 x 185mm, 12 x 80mm holes
ESB12-10 Steam bath, 540 x 430 x 185mm, 12 x 100mm holes
ESB2-8 Steam bath, 250 x 160 x 185mm, 2 x 80mm holes
ESB2-10 Steam bath, 295 x 160 x 185mm, 2 x 100mm holes
ESB6-8IL Inline steam bath, 829 x 162 x 185mm, 6 x 80mm holes
ESB4-8IL Inline steam bath, 563 x 162 x 185mm, 4 x 80mm holes
ESB6-10IL Inline steam bath, 829 x 162 x 185mm, 6 x 100mm holes
ESB4-10IL Inline steam bath, 563 x 162 x 185mm, 4 x 100mm holes

ESB6-8 Steam bath, 334 x 220 x 185mm, 6 x 80mm holes AUD104.00 Availability

MACRO KJELDAHL HEATERS
Constructed of stainless steel and supplied with 1-6 recesses, each fitted with a metal clad element specially designed for efficient heating and minimum effect from liquid spillage. Each element is controlled by an energy regulator and heating is indicated by a pilot light.
Two refractory support rings are supplied for each recess to accept from 100-800mL capacity flasks. They come in 4 sizes with the following internal diameters:
Extra small 50mm
Small 60mm
Large 80mm
K type 85mm
All multiple units include an adjustable stainless steel flask support. Without glassware. For use on 240V 50Hz.

Cat No.	Recesses	Length	Rating
EMAK1	1	150mm	600W
EMAK2	2	305mm	1200W
EMAK3	3	460mm	1800W
EMAK4	4	610mm	2400W
EMAK6	6	915mm	3600W

MICRO KJELDAHL HEATERS
These units are specially designed with incoloy metal clad element set in an aluminium block 65mm diameter machined to give most efficient heating for Kjeldahl flasks. They are controlled by an energy regulator and can operate at temperatures up to 400°C. The body is made of stainless steel. The aluminium block is removable and additional blocks can be made supplied to suit test tubes or flat bottom soxhlet extraction type flasks.
Accepts flasks up to 100mL.
Available with 1 or 6 recesses.

Measurements:
EMIK1 - 90mm (H) x 75mm (W) x 265mm (D). Rating 240V 150W.
EMIK6 - 150mm (H) x 640mm (W) x 265mm (D). Rating 240V 900W.

EMAK2 Macro Kjeldahl heater, 2 recesses
EMAK3 Macro Kjeldahl heater, 3 recesses
EMAK4 Macro Kjeldahl heater, 4 recesses
EMAK6 Macro Kjeldahl heater, 6 recesses
EMIK1 Micro Kjeldahl heater, 1 recess
EMIK6 Micro Kjeldahl heater, 6 recesses
Inquire

EMAK1 Macro Kjeldahl heater, 1 recess AUD353.00 Availability