• European-made range of small instruments on pages E1 - E3
• Waterproof instrument pouch on page E4

REFRIGERATOR / FREEZER THERMOMETER
No batteries. This is a conventional refrigerator/ freezer thermometer which is ideal for meeting quality control needs. Thermometer is certified by the USA NSF (National Sanitation Foundation). Made of rust-proof materials, it hangs out of the way under a refrigerator shelf or may be mounted against a wall with the supplied suction cups. Standard refrigerator and freezer temperature ranges are highlighted. Scale is marked in both Fahrenheit and Centigrade.

Size of the thermometer: 32mm wide, depth of 18mm including bracket, 120mm in length.

ESC210 Refrigerator/ freezer thermometer AUD39.00 Available

ALARM THERMOMETER
This device allows the user to set minimum and maximum temperature alarms on both the internal and external sensor. The external sensor, mounted on a 2.7m cord, is waterproof and can be used outdoors or in liquid. When the temperature exceeds the preset parameters an audible alarm will sound. Simultaneous displays of ambient indoor and external sensor temperature with min-max readings on both. User selectable °C or °F read outs. Useful in labs, incubators, refrigerators, water baths, drying chambers, and fume hoods. Stands or wall mounts and comes with 1 AAA battery. Has no Auto off function which makes it ideal as a temperature alarm for incubators and freezers.
Dimensions: 105 x 70 x 20mm
Weight: 85g

Features

• Internal temperature
• External temperature
• Min-max memory
• Min-max alarm

	Range	Resolution	Accuracy
Temperature	-20~70°C	0.1°C	±1°C, between -20~50°C ±1.5°C, above 50°C

ESC800040RC comes with NIST traceable certificate of calibration.

ESC800040R Alarm thermometer with external sensor, min/ max alarm AUD41.00 Available
ESC800040RC Alarm thermometer with external sensor, min/ max alarm, certified AUD76.00 Availability

INDOOR/ OUTDOOR THERMOMETER
The large LCD continuously displays ambient temperature, -50 to 70°C, resolution 0.1°. The external sensor comes with a 9 ft. cord. A switch changes the readout from indoor/outdoor thermometer, in incubators, or any place where simultaneous internal and external readings are required. Can also display the time. Designed to stand alone or mount on the wall. Comes with a 1.5-Volt button cell battery.
Dimensions: 86 x 44 x 13mm
Weight: 50g

ESC800020 Indoor/ outdoor thermometer AUD47.00 Available

WIRELESS THERMOMETER WITH 3 CHANNELS
Read the temperature inside an environmental chamber or clean room without opening the door. Mount the weatherproof sensor outdoors, in green houses, warehouses, air ducts and other hard to reach places and continuously monitor their ambient temperature from a remote location. The sensor broadcasts the temperature to the monitor from up to 30m away (in an open area) via a wireless RF signal. The monitor displays either the local or remote temperatures in °C or °F, has min/max recall, audible and visual alarms and indicates when the batteries are low in both the sensors and monitor. Each monitor comes with 1 temperature sensor with bench stand and wall mount, and batteries (2 x AA + 2 x AAA) which last about 1 year. The monitor will read up to 3 temperature sensors.
Additional sensors are sold separately.

Specifications
Range of temperature measurement: indoor unit 0 to 50°C, remote sensor -20 to 60°C
Resolution: 0.1°C
Accuracy: 1°C
Dimensions: monitor 100 x 65 x 30mm, sensor 115 x 75 x 25mm
Weight: monitor 83g, sensor 132g with batteries and stand

E800025C comes with NIST traceable certificate of compliance.

E800025 Wireless thermometer set AUD74.00 Availability
E800025C Wireless thermometer set, certified AUD109.00 Availability
E800026 Additional wireless thermometer sensor AUD45.00 Availability
E800026C Additional wireless thermometer sensor, certified AUD85.00 Availability

BASIC TYPE K/J THERMOMETERS
Although mini sized, light weight and inexpensive, these units provide extremely accurate and reliable temperature measurement with all the versatility and range of type K & J thermometers. They feature relative, minimum and maximum temperature, hold and touch tone buttons. Results are displayed on a large 32 x 45mm LCD. An adjustment allows the user to easily calibrate to ice point or any other standard. Model E800007 will read and display results from two probes simultaneously and track the difference between them (T1-T2).
They come ready to use with a 9V battery and beaded wire probe - 920mm long (2 probes for E800007).
Dimensions: 130 x 56 x 38mm
Weight: 170g

Probe	Range	Resolution	Accuracy
Type K	-200 ~ 1370°C	0.1°C	±0.05% rdg + 0.7°C
Type J	-200 ~ 1050°C

Optional accessories
E800060~97 Type K & J thermocouple probes
E840090 Water resistant instrument pouch

Available with NIST traceable certificate of compliance - E800004C and E800007C

E800004 Basic type K/J thermometer AUD99.00 Availability
E800004C Basic type K/J thermometer, certified AUD151.00 Availability
E800007 Basic type K/J thermometer, 2 channels AUD120.00 Availability

IR THERMOMETERS GUNS
Infra red thermometers receive IR radiation from the target and convert that to a small voltage which is displayed as a temperature reading. This method is very convenient and has numerous applications. However, it is important to be aware of some basics to obtain meaningful results.
See User Notes - IR thermometers and emissivity

Non-contact IR thermometers are especially useful for safely measuring the temperature of:

• Moving machinery in factories, automobiles and elsewhere.
• Measure the inside wall temperature of ovens and incubator and the top of hotplates.
• Inaccessible, hot or hazardous objects in electrical, hazmat, HVAC, and other fields.
• The food & beverage and pharmaceutical industries, for avoiding contamination.
• To measure the temperature of a diffusion or mechanical pump, the baking temperature of a lens unit and Ion getter pump.

Simply hold the IR gun, press the trigger and aim the laser guide at the target. Results immediately appear in °C or °F on the backlit LCD and are automatically held for 6 seconds after the trigger is released. Both models have auto power off and an 8:1 distance to spot ratio (D:S). Rugged and ergonomically designed these IR guns come complete with batteries.
Model E800101 measures up to 320°C in 0.5°C resolution.
Model E800102 measures up to 500°C in 0.2°C resolution.
Model E800103 measures up to 535°C in 0.1°C resolution and includes a soft holster and belt loop.

Model	E800101	E800102	E800103
Range	-20 ~ 320°C	-20 ~ 500°C	-32 ~ 535ºC
Resolution	0.5°	0.2°	0.1º
Accuracy	±2% of reading or ±2°C whichever is greater	±2°C from -20 ~ 100°, ±2% from 100 ~ 500°	±3ºC from -32 ~ -20ºC, ±2ºC from -20 ~ 100ºC, ±2% from 100 ~ 535ºC
Emissivity	0.95 fixed
Weight	170g including battery		224g including battery
Dimensions	156 x 87 x 32mm		170 x 105 x 45mm

E800101 IR Thermometer gun, -20 ~ 320°C AUD95.00 Available
E800102 IR Thermometer gun, -20 ~ 500°C AUD97.00 Available
E800103 IR Thermometer gun, -32 ~ 535°C AUD115.00 Availability

IR THERMOMETER, ADJUSTABLE EMISSIVITY
Simply hold the IR gun, press the trigger and aim the laser guide at the target. Results immediately appear in °C or °F on the backlit LCD and are automatically held for 6 seconds after the trigger is released.

Features

• Adjustable audible and visible min/max alarms.
• If the temperature exceeds your minimum or maximum alarm settings, the entire display flashes red.
• Emissivity is automatically adjusted to any thermocouple probe, which can also be used for standard thermocouple temperature measurements.
• Dual display showing current and peak min/max or average temperatures.
• 10 memories and auto power off.

Rugged and ergonomically designed, the thermometer comes with a built in tripod mount, 9V battery and soft holster with belt loop.

Model	E800106
D:S (distance to spot ratio)	12:1
Range	-32 ~ 760°C
Resolution	0.1°C
Accuracy	±3°C @ -32 ~ -20°C, ±2°C @ -20 ~ 100°C, ±3°C @ -32 ~ -20°C
Emissivity	Adjustable 0.1 ~ 1.0
Weight	195g
Dimensions	180 x 130 x 40mm

E800106 IR Thermometer gun, -32 ~ 760°C, adjustable emissivity AUD149.00 Availability

IR THERMISTOR PEN
Pen size unit handles surface & penetration temperature measurements.
One end of the sturdy metal pen contains a non-contact Infrared thermometer for surface temperature measurements. Press the button to scan temperature and release to hold. IR temperature results are displayed within one second on a backlit LCD. The other end contains a stainless steel probe for penetration measurements and features min-max, and hold functions.
The thermistor probe rotates out and locks at 90° and 180°. Two button cell batteries provide 35 hours of continuous IR temperature measurement and two additional button cell batteries power the thermistor thermometer. The displays indicate when batteries need to be changed. Comes in an attractive foam lined metal case with batteries included.

	IR	Thermistor
Range	-33 ~ 220°C	-50 ~ 150°C
Resolution	0.1°, above 200°C 1.0°	0.1°
Accuracy	±2% rdg or 2°C whichever is greater	±1.5% rdg

Dimensions: 185 x 15mm
Probe Dimensions: 155 x 3mm
Weight: 66g

E800108 IR thermistor pen AUD99.00 Availability

IR THERMOMETER/ LED LIGHT PEN
At one end this pen features a super bright white LED. A standard AAA battery provides 6 hours of continuous illumination. The other end contains a non-contact infrared thermometer. Press the button to scan temperature and release to hold. The IR thermometer has a response time of 1 second and is protected by a lens cap when not in use. Two LR44 (button cell) batteries provide 35 hours of continuous temperature measurement. All batteries (1 AAA and 2 L1154 button cell) are included and the display will inform you when they need to be changed. Convenient to carry. Comes in a sturdy, foam lined metal case.

Specifications
Range: minus 33°C to 220°C
Resolution: 0.2°C
Accuracy: ±2.5% or 2.5ºC, whichever is greater
Dimensions: 152 x 13mm
Weight: 60 g

See User Notes - IR thermometers and emissivity for more information on IR thermometers.

E800100 IR Thermometer/ LED light pen AUD83.00 Available

HUMIDITY/ TEMPERATURE PEN
Technicians in HVAC, labs, industry and environmental studies can carry this sturdy metal pen anywhere for quick readings of RH (Relative Humidity) and ambient temperature.
Simultaneously displays RH and temperature in °C or °F. Will also show a continually updated Δ delta (difference) from a starting point. For longterm tests the pen stands upright on its base, enabling unobstructed airflow around the sensor, and it recalls high and low readings over any period of time.
Comes in a protective foam lined metal case with a standard AAA battery and instructions.
Dimensions: 14 x 160mm
Weight: 50g

	Range	Resolution	Accuracy
Temperature	-20 ~ 60ºC	0.1°C	±1ºC / 2ºF
RH	20 ~ 95%	0.1%	±3% fs 30~80% RH otherwise ±5%

Available with NIST traceable certificate of compliance - E800012C

E800012 Humidity/ temperature pen AUD57.00 Available

REMOTE ALARM RH / TEMPERATURE MONITOR
The remote ambient temperature/RH sensor is mounted on a 2.1m cord. Place the highly accurate sensor inside a desiccator, refrigerator, drying or other environmental chamber and view displays of temperature or RH together with their min-max readings on the monitor outside. Select °C or °F and minimum and maximum temperature and RH alarms. When these parameters are exceeded an audible alarm sounds. Stands or wall mounts.
Dimensions: 105 x 70 x 20mm
Weight: 85g

	Range	Resolution	Accuracy
Temperature	-10~50°C	0.1°C	±1°C
Humidity	20~99%	1%	±4% f.s.

ESC800039C comes with NIST traceable certificate of compliance.

ESC800039 Remote alarm RH/ temperature monitor AUD65.00 Available
ESC800039C Remote alarm RH/ temperature monitor, certified AUD106.00 Available

ALARM THERMOMETER / HYGROMETER
Same as 800040 but with humidity instead of external temperature. A unique product useful wherever monitoring of humidity is critical as in pharmaceutical and semiconductor clean rooms, warehouses, museums, workplaces, environmental cabinets, greenhouses, and ripening rooms.

Features

• Internal temperature
• Internal RH
• Min-max memory
• Min-max alarm

	Range	Resolution	Accuracy
Temperature	-20~70°C	0.1°C	±1°C, 2°F between -20~50°C ±1.5°C, 3°F above 50°C
Humidity	20~99%	1%	±6%RH between 30~60%RH at 25°C ±8%RH between 60~90%RH at 25°C

Dimensions: 105 x 70 x 20mm
Weight: 85g

Available with NIST traceable certificate of calibration - ESC800041RC

ESC800041R Alarm thermometer/ hygrometer AUD42.00 Available

HUMIDITY / TEMPERATURE MONITOR
Simultaneously monitors both temperature and humidity on an extra large 8 x 6.4cm dual display which can be read across a room. For labs, chemical storage areas, clean rooms, stock rooms, warehouses, factories, greenhouses, and outdoors. Monitor dessicators, incubators, refrigerators, and fume hoods. Recall min/max temperature and min/max humidity readings over any time period or have it automatically reset itself every 24 hours. Stand or wallmount. Comes with 1 AAA battery which lasts a full year.
Dimensions: 110 x 97 20mm
Weight: 170g

Features

• Internal temperature
• Internal RH
• Min-max memory
• Large display
• Time display

	Range	Resolution	Accuracy
Temperature	-10~50°C	0.1°C	±1°C
Humidity	20~99%	1%	6% 30~60% RH @ 25°C 8% 60~90% RH @ 25°C

ESC800016C comes with NIST traceable certificate of compliance.

ESC800016 Humidity/ temperature monitor AUD59.00 Availability
ESC800016C Humidity/ temperature monitor, certified AUD100.00 Available

WET BULB THERMOMETER, HEAT STRESS METER, DIGITAL
Government organisations such as OSHA have set recommended heat stress limits for various activities. WBGT (Wet Bulb Globe Temperature) provides the most accurate determination of the heat stress index based on the cumulative effect of air temperature, air movement, relative humidity, and radiant heat. This digital wet bulb thermometer is a light-weight meter, compact enough to carry anywhere to avoid heat exhaustion in public health, sports, military and industrial activities. Highly accurate readings with a typical response time of only 15 seconds. Provides settings for both indoor and outdoor activity and includes an audible alarm, adjustable to your WBGT threshold.
Comes with tripod screw and RS232 computer interface.
Globe diameter: 40 mm
Meter dimensions: 255 x 50 x 30mm
Weight: 126g

Optional accessories
E840052 Software
E840054 Cable
E840092 Bench-top tripod
E840093 Field tripod
E840094 RS232-to-USB adapter cable

Specifications	Range	Resolution	Accuracy
WBGT	0~50°C	0.1	±2°C indoor, 3°C outdoor (-15~40°C) otherwise ±2.5 indoor, 3.5°C outdoor
Air Temperature (TA)			±0.6°C
Globe Temperature (TG)	0~80°C		±2°C (15~35 °C)
Relative Humidity (RH)	0~100%		±3%(10~90%) otherwise ±5%

E800036 Wet bulb/ air temp./ RH meter AUD147.00 Availability

INDOOR AIR QUALITY METER
Poor air quality may cause tiredness, inability to concentrate and even illness (i.e., Sick Building Syndrome). This instrument is ideal for monitoring indoor air quality in crowded public spaces with potentially high levels of carbon dioxide, such as offices, factories, classrooms, hospitals and hotels. The same measurement parameters can also be used to test air from HVAC equipment.

Parameters

• CO2
• Humidity
• Dew point
• Air temperature
• Wet bulb temperature

Backlit simultaneous display of CO2 level, humidity and air temperature. Alternatively the user can choose a rotating display of dew point and wet bulb temperature instead of air temperature. Also calculates TWA (Time Weighted Average) and STEL (Short-Term Exposure Limit).
Simple user calibration of CO₂ and RH. Features audible CO2 threshold alarms, min/max/ave, hold and an RS232 computer interface. NDIR (non-dispersive infrared) technology ensures long-term accuracy, stability and reliability.
Comes in a hard carrying case with 4 AA batteries.
Dimensions: 210 x 75 x 65mm
Weight: 280g

Optional accessories
E840027 AC adapter
E840052 Data acquisition software
E840054 USB cable
E840090 Water resistant instrument pouch

Specifications	Range	Resolution	Accuracy
Air Temperature °C	-10 ~ 60°	0.1	0.6°C
RH	0 ~ 100%		±3% (10 ~ 90%) ±5% (otherwise)
Dew point °C	-13.3 ~ 60°
Wet bulb °C	-73.4 ~ 60°
CO2	0-5000 ppm	1 ppm	±30ppm±5%rdg

E800046 Indoor air quality meter AUD360.00 Availability

PSYCHROMETER/ ANEMOMETER

Parameters

• BTU (British Thermal Units)
• Wet bulb
• Dew point
• Humidity
• Air speed
• Air volume
• Air temperature

This unique instrument combines the features of an anemometer and a psychrometer. Also calculates air volume and BTU capacity. Excellent for HVAC, IAQ and environmental work. Auto ranging with air velocity in m/s or ft/s, air volume in CFM or m³/sec and temperature in °C or °F. Features min/max/ave, hold, auto power off, LCD backlight and a computer interface. The probe detaches for easy replacement and repair.
Comes in a hard carrying case complete with a probe, tripod mounting screw and 4 AAA batteries.
Dimensions: metre 175 x 75 x 35mm, sensor head diameter 75mm
Weight: 280g

Optional accessories
E840027 AC adapter
E840052 Data acquisition software
E840052 RS232 cable
E840090 Water resistant instrument pouch
E840092 Bench top tripod
E840093 Field tripod
E840094 RS232 to USB adapter cable

Specifications	Range	Resolution	Accuracy
Air Volume m³/sec	0 ~ 99999	0.1 (0 ~ 999.9) 1 (1000 ~ 99999)	±5%
Air Volume CFM (ft3/min)
Airspeed m/s	0.3 ~ 35	0.1°
Air Temperature °C	-20 ~ 60°		±0.6°C
RH	0 ~ 100%		±3%@10 ~ 90%RH (cal temp.), otherwise ±5%
Dew Point °C	-68 ~ 70°
Wet Bulb °C	-22 ~ 70°
Capacity BTU/H	0 ~ 99999 kw	0.1 (0 ~ 999.9) 1 (1000 ~ 99999)

E840034 Psychrometer/ anemometer AUD244.00 Availability

FOUR CHANNEL DATALOGGING THERMOMETER
This unique portable thermometer displays data from 4 thermocouple probes simultaneously on a large backlit LCD. Automatically records and stores up to 16,000 data points in the field which can later be downloaded to your computer via the bi-directional RS232 port and cable. Graphic software included. Auto ranging with auto power off, min/max and hold functions. Easily calibrates to ice point, or any other standard.
Comes ready to use with 2 beaded wire probes, instructions and a 9V battery, in a protective, foam lined case.

Specifications
Accuracy: ±0.5% rdg. + 1°C
Resolution: <200° = 0.1°, >200° = 1°
Measurement range: -200 ~ 1370°C
Dimensions: 184 x 64 x 30mm
Weight: 238g

Optional accessories
E800003 AC adapter
E800060~77 Type K thermocouple probes
E840089 Rubber holster
E840090 Water resistant instrument pouch
E840092 Bench-top tripod
E840093 Field tripod
E840094 RS232 to USB adapter cable

Available with NIST traceable certificate of calibration - E800024C

E800024 Datalogging thermometer, 4 channels AUD308.00 Availability

WATERPROOF TEMPERATURE DATALOGGER
Place the datalogger in its docking station and program it using your computer, or directly via the datalogger's own keypad. Set to read temperature in 13 fixed intervals ranging from 1 second to 1 hour. The fully waterproof and submersible datalogger is now ready for use in electronic, food and drug production, shipping and storage, greenhouses, refrigerators, art galleries, museums, HVAC, process control, meteorology, agriculture or labs.
Begins recording at the press of a button and logs up to 64,000 temperature readings, each with the date and time. An LED flashes to indicate sampling, and the backlit LCD shows current ambient temperature, battery and memory status. When monitoring is complete, simply return the datalogger to its docking station, download and view results on your computer using the same software.
Datalogger E800057 is powered by 2 standard AA batteries which are included, along with built-in temperature sensor, a wall mount and instructions.
Set E800056 also includes a docking station with computer cable, and software. The same docking station works with any number of dataloggers.

Optional accessories
E840094 RS232 to USB adaptor cable (included with E800056)

Cat. No.	800057 Temperature Datalogger
Temperature range	-30 ~ 70°C
Temperature resolution	0.1°
Temperature accuracy	0.7°C
Display**	backlit LCD
Maximum memory	64,000
Water resistance*	waterproof
Weight*	89g including batteries
Dimensions*	110 x 70 x 20mm

Available with NIST traceable certificate of compliance - E800056C, E800057C

E800056 Temperature datalogger and docking station, waterproof - discontinued
E800057 Temperature datalogger, waterproof AUD173.00 Available

RH/ TEMPERATURE DATALOGGER WITH SD CARD
Reads relative humidity (RH) and ambient temperature dew point and wet bulb, and functions as a type K or J thermometer. Records data onto standard SD memory cards (like a digital camera). When full, simply exchange SD cards for unlimited data storage. The removable SD card is easy to transport and insert into a computer's memory card slot or SD card adapter. Uploads preformatted data to Excel, without the need for additional software and cables. Additional SD cards are readily available in a variety of memory sizes. Can also manually record 99 readings for on-screen review or stream data directly to a computer using the optional software and cables. Each data set includes temperature, RH, time and date. Features min/max, auto power off, low battery indicator and hold function.
This well made unit is extremely accurate with fast response times, and includes a fold-out tripod and large easy-to-read backlit LCD.
Comes ready to use in a soft carrying case complete with a detachable probe, 6 AA batteries, instruction manual and a 2GB SD card.
Dimensions: 177 x 68 x 45mm
Weight: 489g

Optional accessories
E840057 RS232 Computer cable
E840059 Additional 2GB SD card
E840090 Water resistant instrument pouch
E840093 Field tripod
E840094 USB computer cable
E840097 AC adapter
E850080 Software

	Range	Res.	Accuracy
RH	5 ~ 95% RH	0.1	≥ 70% RH ± 3% rdg + 1% RH, < 70% RH ± 3% RH
Ambient temperature	-0 ~ 50°C		± 0.8°C fs.
Dew point °C	-25.3 ~ 48.9°C		Sum of RH & TA accuracies. Calculated automatically from RH & temperature measurement.
Wet bulb °C	-21.6 ~ 50°C
Type K	-50 ~ 1300°C		± (0.4% + 1°C ) fs.
Type J	-50 ~ 1200°C

Available with NIST traceable certificate of compliance - E800021C

E800021 RH/ Temperature datalogger with SD card AUD281.00 Availability
E800021C RH/ Temperature datalogger with SD card, certified AUD374.00 Availability

WET BULB GLOBE TEMPERATURE DATALOGGER
This datalogger measures

• Relative humidity (RH)
• Air temperature (TA)
• Dew point
• Wet bulb globe temperature (WBGT)
• Black globe temperature (TG)

Also captures sample time and date. Records data onto standard SD memory cards, (like a digital camera). When full, simply exchange SD cards for unlimited data storage. The removable SD card is easy to transport and insert into a computer¡¯s memory card slot or SD card adapter. Uploads preformatted data to Excel, without the need for software and cables.
Additional SD cards are readily available in a variety of memory sizes. Can also manually record 99 readings for on-screen review or stream data directly to a computer using the optional software and cables.
Features an adjustable WBGT audible alarm, min/ max, auto power off, low battery indicator and hold function.
This well made unit is extremely accurate with fast response times, and includes a fold-out tripod and large easy-to-read backlit LCD. Comes ready to use in a soft carrying case with 6 AA batteries, instruction manual and a 2GB SD card.
Dimensions: 177 x 68 x 45mm
Weight: 489g

Optional accessories
E840057 RS232 computer cable
E840059 Additional 2GB SD card
E840090 Water resistant pouch
E840093 Field tripod
E840094 USB computer cable
E840097 AC adaptor
E850080 Software

	Range	Res.	Accuracy
RH	5 ~ 95%	0.1	≥ 70% RH ± 3% rdg + 1% RH, <70% RH ± 3% RH
TA	-0 ~ 50°C		± 0.8°C fs.
Dew point °C	-25.3 ~ 48.9°C		Sum of RH & TA accuracies. Calculated automatically from RH & temperature measurement.
Wet bulb °C	-21.6 ~ 50°C
TG	0 ~ 80°C		± 0.6°C
WBGT indoor	0 ~ 56°C		± 1.5°C
WBGT outdoor	0 ~ 56°C		± 2°C

E800037 Wet bulb/ air temp./ RH/ dew point datalogger with SD card AUD486.00 Available